There’s a lot of excitement in the education sector about the need to equip students with skills like critical thinking, collaboration, and communication, to prepare them for a global, innovation-driven economy. But that’s easier said than done. Major changes are needed to move from a decades-old model towards creating new ways to educate students. Schools and their leaders, particularly in low-income contexts, often lack the necessary resources and support.

But given the right tools, school leaders can be the key to bringing this much-needed change to their schools. Knowing this, The William and Flora Hewlett Foundation partnered with IDEO and the Stanford d.school to create School Retool, a four-month-long professional development fellowship that trains principals to take a do-it-yourself approach to school change by conducting small, scrappy experiments called “hacks.”

The best part: They use the resources they already have available to address their schools’ needs now, without waiting for external funding or assistance. School Retool is available to principals at public schools where 60 percent or more of students qualify for free and reduced lunch, which is a common measure of poverty. The School Retool program provides research-based strategies for improving student outcomes, as well as training and one-on-one coaching on how to redesign school culture through easily achievable changes.

A Scaled Approach

School Retool addresses a common challenge in creating change across schools: Each school has its own people, culture, and needs, so programs need to be flexible. The fellowship helps school leaders define their aspirations, and provides them with inspiration through “Big Ideas” that have proven to be successful in different contexts in education. It then supports them to start small with hacks that help them learn how to implement these ideas in their own school. The program scales through regional cohorts of principals who learn from each other as they go through a process of setting goals, designing hacks, reflecting on the learning and progress, and making improvements to the next iteration.

Small Steps Toward Big Change

As School Retool has rolled out at schools across the country over the past two years, it’s becoming evident that small changes are adding up to major progress, and that the small hacks approach is helping leaders go from planning to doing. Take, for example, Marthaa Torres, the principal of a low-income San Francisco high school who started with a small experiment with one struggling student, trying to create a more personalized learning plan for him. “The hacking approach is a framework that will help me eventually get to the kind of school that I’m trying to create,” Torres said. To build on the learnings of her “hack,” she created and expanded a personalized coaching program for the student’s peer group of older Latino boys. Her goal is to roll out additional advisory support in the next school year. What started as a “hack” to give agency to a single student is beginning to affect the school-wide culture by incorporating student voice into decision making.

Creating a Movement

The School Retool fellowship launched in 2015 with a pilot for 16 principals from seven San Francisco Bay Area school districts, reaching more than 12,000 students. School Retool has since hosted cohorts for school leaders in Washington D.C., Detroit, Virginia, Idaho, and Colorado. By the end of 2016, 164 school leaders of over 114,000 students had participated in the fellowship program.

In addition to the in-depth work with school leaders, School Retool is creating a national dialogue around change in schools. Its first national effort drew more than 1,500 principals in the Shadow A Student Challenge, who spent a day walking in students’ shoes to build empathy and gain insight into their students’ school lives.

Learn more about how more school leaders are enacting change: bringing a sense of true belonging to a school’s culture; engaging students as active learners; hacking towards literacy; retooling for equity; and more.

WATCH: Marthaa Torres: Adopting a Hacking Mindset on Vimeo.

Remember your first View-Master? The sound and feel of that iconic camera-snapping motion, the excitement of seeing those vivid images in the form of your own personal slideshow? Introduced in 1939, this stereoscopic toy brought beautiful landscapes and famous attractions to the eyes of kids around the world.

Flash-forward more than 75 years, and the View-Master has been reincarnated to spark that same sense of wonder for the digital age. The redesigned model, the result of a project collaboration between IDEO and Mattel, is a modern case that bridges technology with play. The new View-Master preserves the classic features of the original toy, such as the original lever and wheel, but offers a much more immersive, 360-degree virtual experience.

Here’s how it works: Download the View-Master app and slide a smartphone into the sleek new red-and-white headset. From there, the phone’s camera will scan the QR codes on the reels to view a wide variety of images, such as wildlife, outer space, and a dinosaur landscape. Two slightly different images are displayed side by side on the device's screen. As each of your eyes looks at just the image directly in front of it and tries to reconcile it with what the other eye is seeing, a 3D effect is created. By moving your head around with the viewer over your eyes and taking advantage of the sensors within your phone to sense direction and position, you can travel through each of the scenes, exploring each of the different settings.

After working alongside Mattel to understand the heritage of the View-Master brand, researching the potential for VR and play, and exploring a variety of materials for the new device, designers created several prototypes that they tested with their core market: kids. As a result, the final design accounted for things like whether it could pass a drop-test or fit into kids’ hands.

Beyond the joy of pure play, the technology that powers the new View-Master also opens up a new world of possibilities for learning. Imagine turning a page in a textbook and seeing dinosaurs come to life. Or a virtual tour of an art museum through a set of View-Masters.

"We view this as just the beginning," said Doug Wadleigh, a Mattel executive, in an interview with CNET. "Obviously, we're getting in this space pretty early. The goal is to create the View-Master brand for the next 75 years."

Genentech is a biotech company that tackles difficult-to-treat medical conditions across the globe by creating innovative treatments. As a sponsor of the TED2012 conference, Genentech approached IDEO to partner in creating a “social space” for the TED exhibit hall that would captivate participants in an interactive brand experience and garner excitement around the future of personalized medicine.

To make leading-edge science more accessible to the masses, the team landed on an exciting new provocation: What if we could turn genes into music? IDEO worked closely with Genentech to develop an immersive genetic experiment that could incorporate traits of the TED community, using the company’s brand new technology for overnight gene analysis. A TED participant would choose a colorful trait pin packaged with a cheek swab kit and corresponding barcode, allowing them to leave a genetic sample one day and return the next day to discover that four SNPs of DNA had been analyzed overnight and translated into a unique musical track.

The IDEO team developed the concept, prototyped it with scientists, musicians, and sound engineers, and designed every element of the physical and digital experience—from the swab kit and packaging, to the built space and listening stations, iPad app, and other digital touchpoints. At the heart of the experience was music, including an algorithm that could generate 6500 unique musical combinations to reflect the genetic diversity of the TED participants.

Genentech’s “Infinite Variations” exhibit at TED2012 created the world’s first genetic symphony, an innovative and colorful blend of science and music. With the exhibit, Genentech sparked novel, approachable conversations about the role of genetics in medicine.

Of the 1850 attendees, over 1100 joined the genetic experiment in music and walked away with a new understanding of personalized science—and of their own genetic makeup.

What happens when you serve kids food made with cricket flour? And what do parents think? That’s what IDEO and Bitty Foods sought to learn during a collaboration to explore new kinds of lunchbox foods as a means to discover opportunities for alternative sources of protein.

We talked to Megan Miller, cofounder of Bitty, the Bay Area startup that makes delicious foods with cricket flour, about the collaboration.

Listen to the full audio story below, or go to Soundcloud.

Name: Shruti Ramiah
Location: Munich
Role at IDEO: Design Research Lead
Joined IDEO: 2011
Website: www.shrutiramiah.com
Titillating Fact: I travel a lot for work, and one thing that helps me make every new place feel like home is the BBC World Service Radio (plus a healthy dose of BBC Radio 4). My grandfather used to tune into the World Service News every evening on Shortwave Radio. Now I have the digital radio on almost all the time, and I find the familiar voices very grounding. It’s also why so many of my conversations start with “So, I was listening to this show…”

1. Flash Forward

Flash Forward is a podcast about the future. Each episode starts with a little audio story playing out one potential future scenario—from the believable to the bizarre. I love the way Rose Eveleth brings intangible futures to life in these stories and then breaks them down to investigate the elements of the scenario.

2. New Philosopher

I discovered this magazine in Sydney. It’s one of many great independent magazines coming out of Australia. Each issue focuses on one theme that is relevant to contemporary life, and explores it from a variety of perspectives. I am amazed at how they make philosophical questions accessible and understandable. Don’t be put off by the name.

3. Jean Jullien

Jean Jullien is a wonderful graphic artist with a great light-hearted sense of humour in his work. Following him on Instagram ensures that there’s always a smile (or a smirk) waiting for me in my feed everyday. @jean_jullien

‍

In this series, we ask IDEO designers to share the stuff they're digging right now—tools, books, music, sites, people, places—so you, too, can drink from the fount of inspiration bubbling up here. This week's guest star: Shruti Ramiah.

OUR FIRST TIP COMES FORM NJOKI GITAHI, SENIOR COMMUNICATIONS DESIGNER AT IDEO, WHO RECENTLY LED INDESIGN NOVICES IN NEW YORK THROUGH AN EMAIL-BASED INTRO TO ADOBE'S POWERHOUSE PUBLISHING TOOL.

Sometimes you need to cut to the chase. If you're learning a tool outside your discipline, it's usually because a deadline is looming and your go-to experts can't help. There's no time to luxuriate in lessons. You need Quick + Dirty tips: bite-sized tool tutorials to beef up your skills, one morsel at a time.

Working with hardware enables designers to create more meaningful, situation-specific interactions that might feel cumbersome or be impossible with software alone. Last year, I had the opportunity to work on a project with IDEO.org (a nonprofit design organization that launched out of IDEO with the mission to improve the lives of people in low-income communities through design) that tested my software and physical design skills. The brief: Apply low-cost sensor technology to precision agriculture for smallholder farmers in developing countries.

Informed intuition

Before heading to the field, our small team started by researching precision agriculture practices and technologies for farms and households. We found inspiration in devices like Parrot Flower Power. Even so, we really had no idea what a good precision agriculture device could be, or what challenges farmers faced. But at IDEO, we believe that you learn best by doing. So we quickly ginned up three devices to facilitate conversation with farmers: the Magic Stick, the Ambient Sensor, and the Rice Shoot.

The Magic Stick

Physically, the Magic Stick was inspired by traditional farming tools like rakes and shovels. The tip of the stick was a temperature/humidity sensor that could be stuck into soil or crops that have been harvested and put in storage. Digitally, the Magic Stick created a data table that combined temperature and humidity with GPS location.

The Ambient Sensor

The goal of the Ambient Sensor was to help prevent the growth of a common toxin that spoils crops in storage in many parts of the world. The sensor tested the environment for the conditions that the toxin thrives in: high humidity and temperature. We designed the device to hang on a storage shed wall, and if high humidity and temperature conditions were detected, LED feedback would alert farmers and prompt them to ventilate the space.

The Rice Shoot

We designed the Rice Shoot to measure the water content of rice fields, making the process of rice paddy irrigation more resource efficient, and potentially increasing yields and reducing disease.

We brought our early prototypes to many farms in Kenya, Tanzania, and Myanmar—countries where IDEO.org had existing relationships. During our travels, we spent our days designing, wiring, and programming in the back of bouncing trucks, tidal river boats, and turbulence-prone airplanes. All the people we spoke with were smallholder farmers who need to farm in order to live. Together, we discussed the challenges of growing specific crops in specific regions, as well as any personal challenges they faced. In northern Myanmar's dry zone, we learned that there were no consistent optimal irrigation practices for betel nut, a cash crop that is a big part of the region's economy. Each farmer was watering at different times of day and for different lengths of time, with different yields.

Introducing the Betel Meter

Our time researching with these farmers showed that what they really needed was an upgraded Magic Stick—something with a brain. So we created the Betel Meter, a device that helps farmers create optimal irrigation for betel nut.

The Betel Meter is planted in key positions in a field and takes moisture readings once an hour. Once a day, a farmer presses the meter’s button. A green LED signifies that soil has a healthy moisture level and the farmer can irrigate normally. Red LEDs signify that the soil has been too dry, and farmers should keep irrigation taps open for an additional five or ten minutes. Blue LEDs signify when soil conditions are too wet.

To build the Betel Meter's brain, we used a TinyDuino from TinyCircuits, an Arduino compatible micro-controller with the power of an UNO. The TinyDuino, which is about the size of a quarter, has a brilliant architecture that allows any additional functionalities beyond basic processing to stack on top of each other. This allowed us to keep the core device small, even though it has a real-time clock, a data SD logger, and GPS boards.

Creating the baseline data for the meter turned out to be one of the biggest challenges of the project. Because optimal irrigation for betel nut in an agricultural zone as specific as northern Myanmar is unknown, we had to rely on white-paper research and some intuition. We first researched ideal moisture conditions for all plant life. Then we normalized evaporation rates for water in sandy soil, and cross referenced it against average temperatures for each month in the region.

The physical

The physical design was equally tricky, since the meter needed to withstand extreme weather for long periods of time to protect the sensitive electronics inside. Luckily, we had IDEO.org's Design Director and Co-Lead of the San Francisco studio, Adam Reineck, on the team. He quickly designed a 3D model in Solidworks and printed the form in nylon, which stood up against heavy rain—and even a sandstorm.

Our early prototypes used USB power banks; however, we knew that the Betel Meter had to be an “always-on” device with a reliable and constant power source. We opted for solar power, something the team had experience with. We began by hacking panels out of old solar camping lights and adding a few resistors and extra batteries to the circuit. That way, we could ensure that the device would store enough energy to power the micro-controller and components through the night.

Once we had our prototype, we returned to Myanmar to field test the Betel Meter, planting four of the devices in two fields. Not only did the Betel Meter provide irrigation feedback, it also recorded and created what we believe to be the first-ever dataset around optimal soil moisture for betel nut. People from all over the region came to see and take photos of the meter, and we were continuously asked to come back with the final working product.

From here, our ideal next step is to add machine learning that allows the device's software to evolve from its own data.

Working on the Betel Meter changed my personal approach to design and how I attack problems. Now, on every project, I try to find opportunities to create products that reach deeper into people’s physical lives than pixels on a screen.

Working with such an amazing team, in such a great place and on a product that challenged me the way the Betel Meter did, changed my life. I will be joining the team full time at IDEO.org in New York City this fall, where, hopefully, I will be part of the next chapter of the Betel Meter.

Read more on Fast Company

In my last article, I wrote about a hobby of mine: translating physical objects into digital experiences as a way to test my skills. Like most interaction designers these days, I am fascinated by understanding how digital can connect to our physical reality.

In a studio like ours, with a very distinctive creative culture, where people feel like they have ownership over their workspace, a massive, group art project would help us say goodbye together. Not only would it be one last hurrah for this studio, but it would also help reinforce the idea that our culture would be moving with us to the next space.

For years, our tradition at the Cambridge studio has been to reinvent our kitchen wall every six months or so. We’ve created everything from a hand-cut monster wall to a science fiction fine art series (think Yoda portraits in renaissance style). Knowing this mural would be the studio’s last, we wanted to create something that made people think and talk about design—reinforcing our values—and, of course, something big enough for everyone to be involved.

We also wanted to leverage our skillsets—Grace’s in drawing and painting, Greg’s in industrial design and fabrication—to pull together the project. At the time, Grace had been working on a series of dot drawings that caught Greg’s eye. They mimicked that phenomenon in nature when many tiny things form a greater whole. That seemed like a great metaphor for celebrating the multidisciplinary magic of the studio. So we decided to create a drawing as a base, and then scale it up into a wooden dowel installation.

To get started, Grace created the dot drawing (below on the left) that served as a guide for the dowels. She makes these dot drawings (one of which the mural is based on) over several hours of repetitive stippling. First, she measures the margins of the paper using a ruler as a guide, then forms all of the dots by keeping her hand as straight as possible.

We then scanned the drawing and used a Processing script that located the coordinates of each dot. Next, we used a custom Grasshopper script to place a circle at each centroid and extrude it up to the 3d surface that we created in Rhino. From there, we just exported the lengths of the dowels in order of installation to a CSV file for Chop-Chop, our cutting machine.

If we could design a method to cut the dowels in order, and then get the installers to place them in that same order, we’d be in business. To do it, we needed some way of organizing the dots into rows for the installers to follow—even though they’re not a perfect grid, since they were drawn by hand. By using Grasshopper script, we were able to find logical rows within the hand-drawn pattern.

Since the rows’ zig-zag route only appears in the software, we needed some type of marker for our installers to follow. By using a dot, double-dot, or no-dot marking scheme, we made it easy for our teammates to to identify and stay in their row, even if it zig-zagged.

The panel production took us seven days. We used a ShopBot Alpha to mill each hole, then made a second pass to mark the hole with the appropriate dot pattern.

Each of the 20,000 dowels is a different length, so we built a CNC bandsaw to help us cut them all. After sketching a few concepts, we settled on a JET bandsaw augmented with a custom digital stop.

We created the digital stop using parts we designed and 3D printed, as well as stock parts from Adafruit, Misumi, McMaster-Carr, SparkFun, and Arduino. Arduino reads the length of each dowel from the SD card, then turns a stepper motor and timing belt, moving the stop to the correct length. Once the dowel is cut, the miter sled hits a switch and tells the stop to move to the next position. Once we were in a rhythm, the process was pretty smooth.

One of the goals of this mural was to maintain the feeling of human touch that’s so obvious in the original drawing once we scaled it up to the mural. So we decided to design a straightforward process for our installers, and then chalk up any misplacements to the artistry of human error. As we chopped the dowels, we slotted them into trays marked with row number, tray number (some rows had up to 6 trays), and the dot scheme, so the installer knew where to start.

Four months later, we were ready for the big install. We invited the entire studio to come in on a Saturday morning, and we were blown away by the number of people who trickled in. Before we knew it, close to 40 people were helping out. Some heroes even stayed until 2 a.m. There were people hammering in dowels, cutting on Chop-Chop, filling trays, documenting with photo and video, and making beer runs. The assembly lines were staggeringly efficient and fun. It was a robot love fest.

We had hoped that there may be some errors in the process and we were happy to see them. You can find these beauty marks where the surface of the dowels gets uneven—that kind of inconsistency is impossible to predict or design, and it completely enhanced the beauty of the piece. Working together with the studio on a piece defined by the installers was a true bonding experience. It was an inspiring weekend for all of us, and we know that we’ll carry that with us in our move around the corner.

Music by Dan Deruntz. Footage by Chris Wright, Tom Kershaw, Dirk Ahlgrim, and Greg Wolos.

Materials: 20,928 birch dowels, 5/16” diameter; 7 MDF Panels, painted white; jet bandsaw; custom linear slide; Arduino MEGA; Big Easy Stepper Driver; Adafruit LED display; stepper motor; timing belt and pulleys; limit switches; custom 3D printed parts

Software: Rhino, Grasshopper, Processing, Arduino

Suppliers: Adafruit, Misumi, McMaster-Carr, SparkFun, Jet Tools

‍

As we prepare to move from our current Cambridge studio into a new space around the corner, we can’t help but think of it as a place where many of us began our IDEO journey—sneaking up to the roof for sunset cocktails and riding in the freight elevator to the pop-up gallery in the basement. We knew giving it a proper goodbye should mean involving everyone.

I help organizations cut through complexity by shaping how they show up, through brand strategy, identity, and storytelling.

Working at the intersection of brand and business, I bring an editorial eye and a bias toward making—turning ideas into tangible experiences that people can understand, trust, and believe in.

My work spans government, healthcare, financial services, media, and consumer goods, from launching Gen Z-focused ventures to building innovation labs and reimagining legacy brands. I relish moments of ambiguity and enjoy translating across teams, perspectives, and priorities to move ideas forward.

I started my career in editorial and digital design, shaping cross-platform experiences and identity systems in publishing and agency environments. That foundation still shapes how I work today: I’m detail-oriented, collaborative, and overreliant on the Oxford comma. I hold a BFA in Visual Communication from the School of the Art Institute of Chicago.

For 25 years, I've asked the same question: Who does this design exclude—and what are we going to do about it?

My work spans human-centered strategy, inclusive design, and qualitative research, with clients ranging from Microsoft, Google, and Verizon to the National Science Foundation, and San Francisco Unified School District.

Before IDEO, I taught elementary school in East Palo Alto and spent a decade doing design work with social service organizations—where I learned firsthand what it costs people when systems are built without them in mind.

I am currently writing User Error, a nonfiction book about digital access and the design decisions behind it. I live in Oakland, California.

‍

My expertise spans brand, communication, and product design across tech, education, the arts, and social impact.

I believe great work demands both high-level vision and obsessive attention to detail, and only happens through collaboration.

I bring an inclusive, hands-on approach and a deep understanding of business, which enables me to consistently deliver excellence while always asking why.

Before joining IDEO, I worked at the brand firms Pentagram and VSA Partners. I began my career as a designer, leading teams at the School of the Art Institute of Chicago and the Milwaukee Art Museum. I hold an MFA in graphic design from Maryland Institute College of Art and a BFA in communication design from the Milwaukee Institute of Art & Design, and have taught at some of the best design schools in the US.

I am responsible for IDEO’s long-term success in China and working with clients to use design as a tool to enable growth. Specifically, I have helped Chinese companies design holistic brand solutions through the development of their products, communication, services, and innovation teams, and I have helped multinationals expand their presence and influence in China.

I advise global leaders on developing China-led innovation and capabilities.

In over 15 years in IDEO Shanghai, I have worked on projects that use design to elevate the quality of the experience of healthcare products and services, streamline processes that increase productivity, create spaces and programs that promote and enable inclusive communities, and build next generation mobility solutions that are planet-positive.

Before joining IDEO, I worked at Philips Electronics and the Electrolux Group in Italy, the Netherlands, and Singapore on a number of breakthrough commercial products. I am a member of the Young President Organization in Shanghai.

Most AI products today are built for work—a space with clear problems and established systems. One founder noticed a gap: personal life is messier, harder to systematize, and mostly left behind by the AI boom. So she built Cue, a personal AI that lives inside iMessage and group chats, to go where the other tools haven't.

‍

In this episode, Becca Carroll, IDEO's Chief Strategy Officer, talks with Sida Li, co-founder and CEO of Shared Context Lab, about staying anchored to a human need while the technology around her keeps changing shape, why she treats her business model with the same rigor she'd bring to a product, and what it feels like to build a company at this particular, disorienting moment in AI.

‍

The conversation also gets into how Sida makes design decisions: the language Cue uses to describe itself, the tradeoffs behind building inside iMessage instead of a new app, and a real story about a business idea that didn’t pan out.

‍

This is the second in a two-part series profiling founders from IDEO's Startups-in-Residence program. The first conversation is with Johannes Seemann, founder of Sooner, on designing GenAI for the emotional side of money.

Most personal financial tools are built to run the numbers and optimize towards a budget. While that works for some, most people experience money as a lived relationship that does not neatly fit into a spreadsheet. Johannes Seemann and Becca Carroll discuss why money is emotional before it is mathematical, and what a human-centered approach to building a generative AI financial product looks like in practice.

Mina Seetharaman talks with Scott Shigeoka, author of Seek and Head of Curiosity Cultivation at the Eames Institute, about what distinguishes genuinely curious leadership from performative curiosity, how power dynamics shape curiosity, and why practicing curiosity can restore energy rather than drain it.

Mina Seetharaman talks with David Epstein, author of Inside the Box and Range, about why total freedom often produces average work, how leaders can design useful limits on purpose, and what organizations such as General Magic and Pixar reveal about the relationship between boundaries and creativity.