

Designing a better onboarding experience for an AI symptom checker at clinics
Enabling doctors to spend less time on paperwork and more on patient care.
D4V is a Tokyo-based early stage Venture Capital in partnership with IDEO. Two years ago, D4V invested in healthcare startup Ubie, which develops a service called AI Monshin Ubie. The digital service was created with the goal of reducing the burden on healthcare professionals working long hours, under harsh conditions. AI Monshin Ubie automates a number of patient registration and documentation processes through digital tools, enabling doctors to spend less of their time on manual paperwork, and to dedicate their valuable skills and attention to the patients themselves. Currently, the service is installed in 200 medical institutions in 41 prefectures across Japan.
With AI Monshin Ubie, patients fill out preliminary forms on a tablet, rather than paper, entering information about their health history and current symptoms directly into their digital medical record. As patients fill out the questionnaire, the Ubie AI generates questions in real-time according to patients’ responses, which results in more appropriate and accurate data. The patient’s responses are automatically formatted for the doctor to review prior to and during the consultation. As a result, doctor consultation times and facility operation times are drastically reduced.
With the Coronavirus raising fears of a possible health system breakdown, Ubie has made improvements to anticipate and possibly prevent in-hospital infections. Until recently, Ubie’s services have been primarily used by large hospitals; but in light of the global health crisis, Ubie approached D4V—who partners with IDEO—to help rethink the onboarding experience and quickly facilitate the introduction of AI Monshin Ubie in regional clinics across Japan. D4V and IDEO have been working with Ubie for many years to collaborate in various areas, including UX, rebranding, international research, and more. Therefore, they had a foundation of knowledge from which to build these new features.
Typically, AI Monshin Ubie has been introduced to new hospital clients through direct, in-depth instructional visits from Ubie sales staff. This approach has worked well for rolling out the product to Japan’s 8,000 large hospitals; but for the 100,000 smaller clinics, Ubie needed a more efficient onboarding method to enable staff to get set up smoothly and independently.
During research, D4V and IDEO team members engaged with many different clinic staff members, including full-time doctors, part-time doctors, nurses and receptionists. The researchers found that staff tend to react skeptically to new tools and services, with a common preconception that they will add to their workload. One clinic director’s first impression of AI Monshin Ubie was, “It looks complicated.” But once he actually used the service, he realized that it was very user-friendly.
The team quickly understood that it was important to remove preconceptions by clearly communicating Ubie’s benefits and ease of use. They created a two-minute animation and designed three separate guidebooks. The animation adopted a friendly tone and expressed empathy for doctors, staff members and patients, highlighting how Ubie can bring benefits to each of them. The animation showed how Ubie fits into the existing workflow and explained complex systems in a straightforward and accessible way.
WATCH: A short video clip explains the benefit of their product and service to avoid the users’ concerns in advance.
The guidebook for doctors and directors explains how Ubie’s AI smooths the patient consultation experience and greatly improves the quality of medical care. It also introduces concrete how-tos around set-up, implementation, and ideal workflow. FAQs were also included, addressing concerns about whether or not elderly people would be able to use it.
Ubie business development leader Kenji Yamada says, “D4V and IDEO have a deep understanding not only of design, but of our entire business. They provide inspiration by bringing experience and knowledge that comes from working with other industries and clients outside of healthcare. We appreciate that they can share the knowledge that they’ve obtained with our business.”


Read the Japanese-language version of the Ubie case study here.
When You Feel Unwell, Ask Ubie: Check your symptoms for free
Learn more about Ubie: Global Company Website


An improved airway intubation system that helps physicians save more lives
The GlideScope Core offers elevated visibility and a seamless workflow for intubation, allowing doctors to better conduct routine procedures and respond to health crises.
In the emergency room, an intervention that’s administered too slowly could cost a patient their life. With COVID-19 fueling a surge in acute respiratory conditions, intubation—a procedure that involves inserting a tube through the mouth or nose and into the airway—is more common than ever. For patients struggling to breathe, the tube can be connected to a ventilator that pumps oxygen to the lungs, keeping them alive.
While a laser-focus on the present is critical for successful patient outcomes, hospitals and physicians often don’t have time to look ahead and anticipate the future of the operating room experience. As technology rapidly improves, there is a ripe opportunity and pressing need to evolve medical equipment to be more innovative and intuitive. Verathon Medical, a global medical device manufacturer, is supporting health care providers at the cutting-edge of care.
Verathon approached IDEO to redesign the existing product system for laryngoscopies and bronchoscopies—procedures that examine parts of the throat through intubation. During these examinations, a tube with a camera embedded in the tip is inserted through the patient’s nose or mouth. The doctor can then see inside the throat on a video monitor, and therefore more easily and quickly intubate and perform the exam.
To create a groundbreaking device, the team observed over a dozen laryngoscopies, bronchoscopies, and intubations. They noticed that many anesthesiologists relied on fixed equipment during the procedures. For example, some had grown accustomed to looking over their shoulder—away from the patient—to view the monitor.
During interviews, physicians and residents expressed difficulties with the current technology, sharing that the small screens aren’t conducive to team viewing or student instruction, and they must often use a separate computer to record patient notes. Others reported frustrating workflows, needing to constantly divert their attention and move their hands between the patient, prep tray, monitor, sterile bin, and disposal bin. These inconveniences and inefficiencies are not only cumbersome, but can increase the risk of infection and fatality.
The team relied on these insights to start designing a next-generation product. Through sketching, storyboarding, and building in real-time alongside doctors and clinic staff, designers quickly teased out additional findings and validated concepts.
This work led to the creation of the GlideScope Core: an all-in-one, portable product system that supports both video laryngoscopies and bronchoscopies. The base of the device—a wheeled cart—has built-in storage units for tools and a disposal bin, offering more mobility and accessibility for medical professionals.

The product’s tagline, “see more, do more,” points to the improvements made to the video system, including a large 10- or 15-inch high-definition touch screen monitor. Displayed images can be enlarged and rotated 180 degrees for improved visualization, team viewing, resident training, and classroom demonstration. To help doctors keep both the patient and monitor in their line of sight, the detachable screen can be secured to an adjustable arm that can be positioned directly over the patient. Additionally, the monitor’s patient annotation feature gives staff access to more of what they need in one device.
The product has been especially valuable for providers and patients during the coronavirus pandemic, when it’s imperative for doctors to keep their distance from patients’ mouths and noses. The GlideScope Core’s movable, detachable, and large, high-definition monitor makes it easier to take this precaution and intubate more quickly. This usefulness is reflected in the 5-fold increase in cart-based device orders for Verathon. While most providers typically order anywhere from 1 to 20 devices for airway procedures, one hospital system requested 600 GlideScope Core systems to meet current intubation demands.
Through modern technology and a focus on human needs, the GlideScope Core supports improved patient outcomes and creates a more seamless operating experience for medical professionals. The product underlines the key but often overlooked fact that often, in order to ensure the healthcare industry is patient-centered, medical device manufacturers and hospitals must also focus on improving the experience of providers.


Transforming a community hospital from the inside out
Designing for caregivers to create world-class care for patients.
Healthcare is notoriously difficult to change. Rules and regulations present complex barriers; health practitioners and organizations often have entrenched ways of working; and lives are literally on the line. Despite these significant barriers, the leaders at Newton-Wellesley Hospital (NWH) boldly committed to improving patient care through a new approach.
NWH is a community teaching medical center in Newton, Massachusetts. Because of its proximity to Boston—a city known for world-class healthcare institutions—NWH needed to differentiate itself. The hospital's new president, Dr. Michael R. Jaff, reached out to IDEO for help: "I knew that providing an unparalleled patient experience would set us apart from our competitors." But, Dr. Jaff’s particular approach was unique. He and Dr. Jodi Larson, Chief Quality and Experience Offer (CQXO), saw an opportunity to drive better patient outcomes through cultural and organizational change.
"You cannot learn any more than when you get to listen to your potential patients say why they would never walk into your place." —Dr. Michael R. Jaff
IDEO partnered with NWH for a year of work together, kicked off by defining the vision for NWH and ramping up to in-hospital prototyping and the launch of several new initiatives. A pilot project with the Women's Imaging Center (WIC) focused on solving departmental and employee challenges to provide a better experience for women getting mammograms.

Fueled by this potential, the WIC team redesigned key work processes and created a set of experience principles that inspired new service prototypes. Guided by principles like "Express mutual gratitude" and "Honor every voice," the WIC team tested ways for patients to acknowledge outstanding caregivers and created tools to gather better feedback from patients and adjust quickly. The experience of designing better services inspired the WIC staff to become ambassadors for the power of design thinking across other departments inside NWH and they continue to build on the work through new prototypes and experiments.
Next, IDEO partnered with NWH’s ambulatory surgery group. They took an analogous research trip to Boston’s Logan airport to see with fresh eyes how other high-touch customer service organizations provide customer value in a complex setting. Insights from the trip were applied through live prototyping of several new experiences inside the hospital, including a pre-surgery visit summary and pre-operation care carts.
Analogous research helped us realize that we can learn from other industries and incorporate some (cool) best practices if we allow ourselves to get over the ‘that would never work in the hospital’ mentality. - Dr. Jodi Larson

One of the most impactful prototypes was Care Modes, a tool to empower the NWH care teams to tailor their approach and interaction with patients based on the patients’ unique needs, beyond simply their clinical requirements. Four distinct approaches were identified for engaging a patient before surgery—Explain, Partner, Embrace, and Encourage. The Care Mode is determined based on the provider's understanding of a patient's degree of self-advocacy and their confidence that surgery is the best solution to their issue.

Historically, care providers have been trained to deliver consistent care above all else. However, Care Modes powerfully acknowledge that patients respond differently to different types of care. The Care Modes empower the team—from surgeon to nurse to anesthesiologist—with a clear framework for how to interact with and provide care for patients so they feel most comfortable. Based on the prototype's success with patients and impact on the staff culture, NWH has incorporated Care Modes into EPIC, the hospital's electronic medical record.
The importance of being patient-centered has been central to the healthcare conversation over the past thirty years; but new explorations reveal that there’s far more potential for innovation and improvement when the provider experience is considered in tandem with the patient’s. Each enables the other, and design for both together yields stronger solutions and better outcomes. IDEO's work with NWH demonstrates this vital shift in user-centered healthcare—one can't design services and experiences for patients without designing for their providers’ culture as well. When these go hand-in-hand, meaningful institutional change in healthcare is more than possible.


Helping a historic museum prepare for the future
Using design thinking to improve access, experience, and culture.
The mission of Chicago's Museum of Science and Industry (MSI) is to inspire children to achieve their full potential in the fields of science, technology, medicine, and engineering. Leaders at MSI realized they needed to drive day-to-day operations and maintain historic exhibits while focusing on where to go next. To prepare for its next decade, MSI worked with IDEO to create a new business focus to support the museum’s aspirations for the future. The plan would allow MSI to respond to the demands of the marketplace and raise the funds to get there.
At the beginning of the project, MSI laid out its priorities: improve equity of access, enhance the museum experience, and create a more innovative culture. To dive into each of these areas, IDEO conducted immersive research with families, teachers, donors, and staff.

IDEO brought together 60-plus donors, board members, and staff members to engage in a design thinking exercise to unpack and address the tensions that come with choosing a new strategic trajectory. Instead of having a standard ballot vote, the IDEO team encouraged participants to get up and vote with their feet, helping the group of stakeholders physically align on the museum’s new direction.
At the end of the research and prototyping phases, MSI and IDEO developed a vision called Provoking Minds, Inspiring Futures, creating six detailed design briefs to equip MSI teams to bring initiatives forward. The briefs laid out everything from recommending a new Department of Next, dedicated to ensuring that the future is at the heart of everything the MSI does, to MSI Runway, a place for experimental, small-scale, and limited-run exhibits. The ideas were brought to life with an interactive exhibit, built quickly with everyday materials like plywood and circuit boards, to demonstrate that creating an inspiring vision of the future doesn’t have to be an expensive endeavor.
The team also focused on insights that highlighted accessibility issues some families brought up early in the design process—travel across the city via public transportation can be lengthy, and the cost of admission to special exhibits could be prohibitive. To address these concerns, IDEO came up with the Mission Accessible brief: Inspired by casino buses, MSI bus stop signs would be posted in various low-income neighborhoods, signaling a way to take kids and families to the museum for free.

During the project, the IDEO team identified some low-hanging fruit, like rethinking ticketing and improving the student field trip experience, and helped the museum create cross-functional innovation teams to apply design thinking skills towards solving those challenges. They researched, brainstormed, and pushed forward new concepts, meeting weekly to share and build on ideas. At the end of the four week period, each team prototyped their ideas—new outdoor programming, software tools for visiting tour groups—and pitched them to each other.
In 2019, two years after the conclusion of the project, the collaboration paid off. With its new strategic plan and additional resources, the museum has renewed its commitment to serving youth, and MSI’s team, including donors, are aligned on a collective vision of the future. MSI raised more funds than in any previous year, including the single largest gift in its history—$125 million, nearly half of its $380 million fundraising goal—that will help ensure the years ahead.


Meet the Sisters Behind Block Shop
There are creative crushes, and then there are girl crushes. This qualifies as both.
While beautiful textiles (and now prints!) are Block Shop’s most recognizable output, there’s a good deal more going on behind the scenes. The duo created Block Shop in partnership with a family of printers and dyers in Bagru, Rajasthan to keep the artistry and craft of Indian block printing alive. (They donate five percent of their profits each year to building and implementing community healthcare programs.) If their reverence for craft and respect for humanity isn’t enough to make you weak in the knees, this interview should do it.

In one sentence, who are you?
Hopie Stockman: Josephine March with an MBA.
Lily Stockman: Gertrude Bell on a camel after too much coffee.
What do you do? How did you learn it?
HS: I run Block Shop—a textile and design studio—with my sister, Lily. In reality, I work seven days a week, but five of them take place in our 11th floor downtown Los Angeles studio. I design everything from rugs to public murals to business strategy and Grand Central Market lunch orders for Block Shop.
We both went to grad school; I went for for business and Lily for painting. Rather than dividing our work rigidly between business and creative, we’ve found that it works best when we share responsibilities.
A lot of our education happens in Jaipur, India. In 2010, Lily was living in there and apprenticing under master Indian miniature painter Ajay Sharma when she first met our printers. Since then, we've gone back to Jaipur twice to year to work with them on new designs and products. Everything we know about wood block printing we've learned on the ground while prototyping with our team, lending a hand in all aspects of the process, from dye-mixing to block registration on the fabric.

On the business side, the most valuable advice has all come from the (mostly) women running their own small and successful businesses here in LA. For example, our friend who runs a candle company helped us build our wholesale strategy. When we started out, we thought we wanted just a few huge department store-style accounts to streamline our operations and provide reliable cash flow. She helped us to understand the marketing power of wholesale: that smaller, well-aligned shops could be better storytellers and champions of our brand, and likely wouldn't discount as aggressively.
Another friend who has an independent furniture line shared invaluable advice on how to collaborate with large companies, emphasizing the importance of control over the design and fabrication process. Megaretailers actually need the cool factor of small, independent brands in order to be relevant. The question for small brands is whether the paycheck and promise of exposure is worth the potential chargebacks, brand dilution, and even customer alienation. For us, we've learned that it doesn't work unless we're making the products ourselves and have control over the storytelling.
What are your 3 favorite possessions?
HS:
- Otto, our bearded mutt.
- A painting of a rabbit that my great grandfather painted 60 years ago.
- The Kishore Kumar Bollywood poster that my now-husband and I bought together at the Chor Bazaar in Mumbai, when we had only been dating a few months. It sort of signified that leap into a shared life—jointly owning things.
LS:
- My baby Olympia.
- My dog, who I bought from the pound for $85.
- My gold bangle bracelets given to me by our surrogate grandmother, collected from her travels around the world.

What does a typical work session look like?
LS: On design days, we hide our laptops and put the screens away. No phones, no nothing! Out come the old art books on Anni Albers, Arp, Matisse, and Sheila Hicks. We put some Grateful Dead on, get the watercolors out, and swap sketches back and forth across the table. The result is so much better when we do it together. We’re always improving each other’s work. We try to design like this for two-to-three hours once a week, which is pitiful, but that’s the reality of running a small company; the actual drawing sessions take up only a small percentage of our time.
When it comes to our work, we have a simple design rule: Everything Block Shop touches must hold up as a holistic composition. That means it needs to have balance and a sense of quiet. My favorite painting teacher said, "You know a painting is done when it's quiet. Nothing on the canvas is yelling at you." And if it doesn’t look good hanging on the wall, then it doesn’t go into production.
How do you get over creative block?
HS: Take Otto for a walk past the old movie palaces in downtown L.A. to remember that inspiring design lives everywhere in architecture. On a recent prototyping trip to India, I started panicking that we’d exhausted all geometric patterns—THAT’S IT, WE’RE FINISHED! WE’VE USED EVERY ITERATION OF CIRCLES AND TRIANGLES! Then we went for a walk to get chai with our sketchbooks in hand, and boom! All sorts of ideas emerged from the marble latticework and archways in the old city. We simply needed to look.

What was the last item on your to-do list?
LS: Plan a Texas road trip starting in Marfa, where our friends run the El Cosmico.
How do you see the world in 2078?
HS: A degree or two warmer. Governed by data and manufactured by robots, with no boundaries between advertising, entertainment, and politics. Hopefully, I’ll be with the people who’ve returned to hands-on, empathy-based, slow living….off with my grandkids somewhere outside making pinch pots.
What's your number one bucket list item?
HS & LS: Design a boutique hotel.
Who are you creative crushin’ on lately?
HS: Katja Blichfeld, co-creator of High Maintenance. (If you’re out there, hey.)
There are creative crushes and then there are girl crushes. This qualifies as both—squared. Sisters Lily and Hopie Stockman are the founders of Block Shop, a textile company based in Los Angeles and Joshua Tree. I discovered Lily and Hopie a few years ago through an online web of women makers, and have been feverishly following their work ever since.


Your Daily Creative Challenge
A few snaps can catalyze a chain reaction of curiosity
As a Third Culture Kid, I took pictures to trace my changing worlds. These days, capturing and reflecting on images is how I feed my sense of wonder. This creativity challenge uses a dash of intention to keep your curiosity engaged throughout the day.

1. Morning Capture
In the morning, take a picture of something or someone around you.
Make a mental note of why you photographed the subject. What caught your attention? Then, examine the image. Identify one element or aspect of that image that strikes you. It can be anything—an object in the frame, a color, a texture, a mood. What sparks your curiosity? This is the kernel of inspiration for the next picture you’ll take in this short series.
Write down and complete this sentence: In my next picture, I’m curious about exploring ______.

2. Midday Capture
In the afternoon, take a picture inspired by the kernel of inspiration you wrote down earlier and reflect on what you appreciate about this new capture. Then, look at the image, studying it to identify a new kernel for the next picture you’ll take.
Write down and complete this sentence: In my next picture, I’m curious about exploring ______.

3. Evening Capture
In the evening, take a picture inspired by the kernel of inspiration you jotted down in the afternoon.
Then, look back at the first and last images you captured. Compare them. What’s their relationship to one another? What do you make of their juxtaposition?
Did your curiosity take you far from where you started? Did you circle around a single idea? What does that say about you in this moment of your life? Even if the setting didn’t change much, noticing details in your everyday environment can be a worthwhile exercise—especially in an era of selfies.
I hope this challenge was an easy way to observe what's around you. It can also be compelling if done over a week or month. Instead of taking multiple pictures in one day, take one picture per day and identify a kernel of inspiration to steer your focus for the photo you snap the next day, and repeat. Compare your first image with your very last, and reflect on the journey.
One last provocation: Pass this creative challenge to someone you know. Just copy and paste the instructions and, in the spirit of generosity, give them your last image to help inspire the first image they might take—like a visual chain letter.

Creativity isn’t a state of being—it’s a practice. So Fast Company created a 14-day challenge, tapping some of the most intriguing and productive minds in their community to provide exercises to help their readers reach their creative potential. One of their contributors is our own Roshi Givechi, partner and executive design director at IDEO New York. Here’s her recipe for discovering inspiration in the every day.


5 Things My Startup Taught Me About Design
What I learned from developing my own product
I came up with the concept years ago, when I realized that I had grown up so dependent on Google maps in London that I could barely recognize a street two blocks from my house. I’ve always liked to do mental exercises, pinpointing different places in the world I wanted to visit, or figuring out which direction I would need to go to get home.
IDEO projects rely on a brief and constraints. But I decided this project would be boundless. I wasn't going to rely on it financially, so I could take risks and experiment without worrying about money. It would also put me in the shoes of the very people for whom I often design. We work with startups a lot, so building my own to learn the struggles and nuances of a project like this would give me insight into what founders go through.
Over the last couple of years, our team has had many failures and successes. We’ve learned that it’s tough to keep a team motivated to work on a side project. We managed to build the prototype and the campaign in a very short time, but when the harder, darker part of the development began, momentum slowed and problems took longer to solve, causing delays.

Today, we are four weeks away from shipping the first units, and have around 2,000 people waiting for Haize to arrive, so I answer a ton of questions by email every day. No matter how good your intentions, there will be both positive and negative feedback.
Here’s what I have learned—and relearned—from this startup phase:
- It is all about the team, and users are part of that team. Make sure to consider them as you make decisions for your company and your product.
- Coming up with an idea is fun, but actually figuring out how to make it work is longer, harder, and darker. Get ready for it.
- Show your face. Revealing the people behind the work gives the project and services a deeper dimension.
- Storytelling can be as important as the product itself. It keeps the team excited, leading to better and more efficient work. It also helps users feel more personally involved in the process and the product.
- Mike Tyson said, "Everyone has a strategy until they get punched in the nose." Many of your strategies will probably fail. It’s a very humbling experience. But it helps you grow and learn.
Above all, though, this project has let me do something that is really important to me as an interaction designer: empower people with technology without substituting their own skills. Haize doesn’t tell people where to go—it just helps them find their way. To me, it’s a great metaphor for the work designers do everyday.
What have you learned from your side project or startup? Reach out to IDEO on Twitter.
When I learned that I would have to wait for a visa before starting my job as an interaction designer at IDEO, it felt like the perfect moment to do something I’d always wanted to do: develop a product from initial concept to final production and delivery. I went after an idea I’d had for a long time: A smart compass for bikes that points you to your destination, without giving you full-on directions. I named it Haize.


3 Creative Lessons to Learn From Our Kids
Rules for maintaining a childlike curiosity
To get him on board with what we need to do next, I turn all of our actions into play. When I want to leave the house quickly, I play "who can get a toy to take with us faster" game. When I want to put him to bed, I start “gotta sleep otherwise a monster will come and get you" play. It doesn’t always work like I want it to, but it’s still much easier to convince my son to move on to the next action of play, rather than asking him to follow my instructions.
Children develop skills through play. They repeat things when they’re fun, which helps them master things, and gives them the confidence to attempt the next challenge. This is the way we all grew up. But we tend to abandon that as adults.

As we get older, play starts to feel improper. We’re not supposed to be curious about things that are considered normal or ordinary in the world of adults. Sometimes, even something as simple as going to the movies can start to feel lazy; you have to start to push yourself to do things that are fun and without practical purpose.
In Japan, where I live, the pressure of the adult world is particularly strong, and people who are interested in things that no one else is interested in are often labeled as “Kuuki ga yomenai hito.” The exact translation is “people who can’t read the air.” It is widely used in the office environment when someone disagrees with others, or in casual conversation, if, say, you and your friends go to a restaurant and you are the only one who orders something different.
Because of this strong social pressure, we stop doing things just because we like them, and agree with others as much as possible to avoid standing out. Another Japanese proverb offers a similar sentiment: “The nail that sticks out gets hammered in.” In this kind of cultural environment, we start looking for the logical reasons for everything we do, and stop following our intuition.

Thanks to my son—and probably my job as a designer—I'm aware of that pressure and try not to be swayed by it. I’m a curious person. I would rather make time for playing or plotting small pranks—like putting googly eyes on street signs, playing connect the dots with a pen and the moles on my skin, or creating random D.I.Y. bento events with friends.

To keep my childlike impulses intact, I’ve made three rules for myself to stick to:
- Purposely do things without purpose. We are trained to make goals, meet deadlines, and get things done. Doing something with no end goal helps you listen to your instincts.
- It is OK to not understand. There are so many unknowns in this world, and you will not be able to understand everything, even when you are old and wise. Sometimes the way you feel is better than a definitive answer.
- Let yourself be a curious animal. We all are interested in different things—that is what makes the world interesting. No matter how weird or useless or off the wall your interest, embrace it.
Follow these basic creative principles and it will supercharge your imagination, allowing you to see the world in a more playful, childlike way. I know of no better way to set the stage for creativity, design, and inventing something new.
Since I started my life with my son, the way I plan my day has totally changed. He’s an imaginative child who talks to invisible friends and turns the bathtub into a racetrack. He loves to play, and he does not like to stop, even when I am in rush to get to a meeting or it’s already way past his bedtime.


Lindsey Turner
I’m passionate about building brands, products, and experiences that help organizations show up with meaning and momentum.
I help organizations cut through complexity by shaping how they show up, through brand strategy, identity, and storytelling.
Working at the intersection of brand and business, I bring an editorial eye and a bias toward making—turning ideas into tangible experiences that people can understand, trust, and believe in.
My work spans government, healthcare, financial services, media, and consumer goods, from launching Gen Z-focused ventures to building innovation labs and reimagining legacy brands. I relish moments of ambiguity and enjoy translating across teams, perspectives, and priorities to move ideas forward.
I started my career in editorial and digital design, shaping cross-platform experiences and identity systems in publishing and agency environments. That foundation still shapes how I work today: I’m detail-oriented, collaborative, and overreliant on the Oxford comma. I hold a BFA in Visual Communication from the School of the Art Institute of Chicago.


Rachel Young
My work helps organizations see who their products aren't working for—and build the will and the tools to do something about it
For 25 years, I've asked the same question: Who does this design exclude—and what are we going to do about it?
My work spans human-centered strategy, inclusive design, and qualitative research, with clients ranging from Microsoft, Google, and Verizon to the National Science Foundation, and San Francisco Unified School District.
Before IDEO, I taught elementary school in East Palo Alto and spent a decade doing design work with social service organizations—where I learned firsthand what it costs people when systems are built without them in mind.
I am currently writing User Error, a nonfiction book about digital access and the design decisions behind it. I live in Oakland, California.


Brian Pelsoh
I lead with craft, ensuring our work is creatively excellent: rooted in deep human insight and imagination, while also grounded in the realities of business and technology.
My expertise spans brand, communication, and product design across tech, education, the arts, and social impact.
I believe great work demands both high-level vision and obsessive attention to detail, and only happens through collaboration.
I bring an inclusive, hands-on approach and a deep understanding of business, which enables me to consistently deliver excellence while always asking why.
Before joining IDEO, I worked at the brand firms Pentagram and VSA Partners. I began my career as a designer, leading teams at the School of the Art Institute of Chicago and the Milwaukee Art Museum. I hold an MFA in graphic design from Maryland Institute College of Art and a BFA in communication design from the Milwaukee Institute of Art & Design, and have taught at some of the best design schools in the US.


Tony Wong
I am responsible for IDEO’s long-term success in China and working with clients to use design as a tool to enable growth.
I am responsible for IDEO’s long-term success in China and working with clients to use design as a tool to enable growth. Specifically, I have helped Chinese companies design holistic brand solutions through the development of their products, communication, services, and innovation teams, and I have helped multinationals expand their presence and influence in China.
I advise global leaders on developing China-led innovation and capabilities.
In over 15 years in IDEO Shanghai, I have worked on projects that use design to elevate the quality of the experience of healthcare products and services, streamline processes that increase productivity, create spaces and programs that promote and enable inclusive communities, and build next generation mobility solutions that are planet-positive.
Before joining IDEO, I worked at Philips Electronics and the Electrolux Group in Italy, the Netherlands, and Singapore on a number of breakthrough commercial products. I am a member of the Young President Organization in Shanghai.
How to use AI as an editor, not a writer
Ed White shares how he uses AI as an editor—not a writer—to sharpen storytelling, rehearse ideas, and preserve the productive friction that makes creative work better.
Ed White has a rule he's tested on his own writing: hold yourself as the writer, and let AI be your editor. Ed is a Senior Design Director at IDEO's London studio, where he co-leads the firm's AI portfolio across Europe. Before IDEO, he spent 12 years as a writer and editor at the Financial Times, Wired, and Contagious. So when he talks about when to use AI for storytelling and when not to, it comes from two decades of crafting his storytelling skills.
In this episode, Mina Seetharaman talks with Ed about two specific tools he uses to keep AI in an editor's seat: a "roasting agent" prompted to critique his drafts without any sugarcoating, and a simulated audience he rehearses pitches on before the real thing. They also get into what Ed is hearing from design leaders at Anthropic, Lovable, Shopify, and Google Creative Lab about how creative work is changing, and why he thinks the friction of writing something yourself is worth protecting rather than automating away.
Building a personal AI for the messiness of life: Sida Li
Becca Carroll talks with Cue co-founder Sida Li about designing a personal AI for the messiness of everyday life—not just work. They explore how Sida stays anchored to human needs while navigating fast-changing technology, product tradeoffs, business-model experimentation, and the realities of building an AI company today.
Most AI products today are built for work—a space with clear problems and established systems. One founder noticed a gap: personal life is messier, harder to systematize, and mostly left behind by the AI boom. So she built Cue, a personal AI that lives inside iMessage and group chats, to go where the other tools haven't.
In this episode, Becca Carroll, IDEO's Chief Strategy Officer, talks with Sida Li, co-founder and CEO of Shared Context Lab, about staying anchored to a human need while the technology around her keeps changing shape, why she treats her business model with the same rigor she'd bring to a product, and what it feels like to build a company at this particular, disorienting moment in AI.
The conversation also gets into how Sida makes design decisions: the language Cue uses to describe itself, the tradeoffs behind building inside iMessage instead of a new app, and a real story about a business idea that didn’t pan out.
This is the second in a two-part series profiling founders from IDEO's Startups-in-Residence program. The first conversation is with Johannes Seemann, founder of Sooner, on designing GenAI for the emotional side of money.
Designing GenAI for the emotional side of money: Johannes Seemann
Designing financial tools around the feelings that shape money decisions.
Most personal financial tools are built to run the numbers and optimize towards a budget. While that works for some, most people experience money as a lived relationship that does not neatly fit into a spreadsheet. Johannes Seemann and Becca Carroll discuss why money is emotional before it is mathematical, and what a human-centered approach to building a generative AI financial product looks like in practice.
The curious leader's edge in uncertainty: Scott Shigeoka
How genuine curiosity helps leaders navigate uncertainty with greater confidence.
Mina Seetharaman talks with Scott Shigeoka, author of Seek and Head of Curiosity Cultivation at the Eames Institute, about what distinguishes genuinely curious leadership from performative curiosity, how power dynamics shape curiosity, and why practicing curiosity can restore energy rather than drain it.
Looks like you might be in search of something very specific?
Or reset the filters above and try another angle.
Here’s some random inspiration

Podcasts about creative leadership

Articles about the power of prototyping
