In 1987, the three companies that would later form IDEO worked together with Microsoft to create the world’s first ergonomically designed mouse. IDEO’s human factors research suggested a small but significant change: Moving the location of the mouse ball forward, from under the palm to under the fingertips, enabled more precise control and resulted in measurable performance differences compared with earlier models.

The industrial design effort examined and tested dozens of shapes in comfort and aesthetic studies that led to the famous “Dove Bar” form, a significant advance over the boxy mouses prevalent at the time. The resulting clean appearance, enhanced control, and improved reliability created enormous consumer appeal that replaced all earlier versions, and Microsoft sold more than 2 million units in its first two years.

With approximately 55,000 Americans waiting to receive kidneys and a list that could double in the next 10 years, there is an acute and urgent need for new technology to increase the quality and number of organs available for transplant. Using the conventional method of organ storage and transportation—a cooler filled with ice—doctors and nurses needed to accompany the organ to ensure proper handling.

IDEO and Organ Recovery Systems created the LifePort Kidney Transporter to provide a new high-tech alternative. The LifePort gently perfuses, or pumps, the kidney with a cold liquid solution to improve its condition before transplantation, which can nearly double storage time and may increase the number of usable kidneys and improve patient outcomes. The device also provides critical data to monitor and evaluate kidneys during transport.

Organ Recovery Systems believes that perfusion has the potential to remove tens of thousands of patients from the waiting list and dialysis, and save the healthcare system more than $1 billion annually. In 2006, the LifePort Kidney Transporter was used to transport 350 kidneys per month in 12 countries, and was included in the permanent architecture and design collection at the Museum of Modern Art in New York City.

Pediatric healthcare system Nemours provides primary, hospital, and clinic-based specialty care, prevention and health information services, and medical education programs in Delaware, Florida, New Jersey, and Pennsylvania. When Nemours wanted to strengthen its brand, it faced two challenges: Empowered patients had more access to information and choice than ever before, and new players—alternative-care centers, retail-based care clinics, and urgent-care centers—were entering the marketplace, diverting market share.

Nemours approached IDEO for help in creating an innovative, differentiated, and patient-centric experience for a new hospital in Orlando, with the goal of establishing Nemours as a destination care provider and industry leader. Together, they identified and clarified both family needs and key experience touchpoints in the patient journey, resulting in the state-of-the-art-designed, 60-acre, $400 million Nemours Children’s Hospital in Lake Nona Medical City, Florida. “The design team’s approach to defining key moments in the patient journey was highly instructive,” said Dr. David Milov, chief of clinical informatics at Nemours. “They captured insights otherwise unavailable to us.”

Concepts that were realized in the hospital’s final design include:

• Care Team Room ID: Patients and families are introduced to each member of their care team to ensure continuity of care.
• Floor Greeters: Concierge-like greeters welcome and orient families and answer questions.
• Family Lounges: Private dining rooms have kitchenettes, so families can cook and eat together.
• Emergency Department: Patients are greeted, sorted by medical condition, and immediately checked into rooms.
• Patient Information Screens: Doctors and nurses can access patient information prior to entering an exam room to enable informed conversations and build trust.
• Smart Bracelets: Personalized RFID-enabled bracelets keep track of the care team.
• Smart Rooms: Triggered by the Smart Bracelet, Smart Rooms “welcome” the patient upon entry.

To arrive at these designs, IDEO sought inspiration via analogous kid-friendly environments, such as museums, schools, toy stores, and zoos. Designers also conducted in-context interviews with patients, parents, families, doctors, nurses, support staff, and outside physicians. One key insight that led to the final design: Patients and families came to Nemours with varied levels of experience—first-timers, occasional visitors, and those who were chronically ill—but the hospital treated them all the same.

To address these needs, the team created an experience blueprint focused on welcoming, guiding, and supporting patients and families through unique environments, integrated service moments, and market-differentiating spaces and tools. To test the look, feel, and value of the designs, designers built full-scale foam core prototypes of welcome stations, waiting lounges, and exam rooms.

The results appeal to patients, families, and caregivers. According to Dr. Lane Donnelly, Nemours chief medical officer, “all the amenities at Nemours focus not only on the child but their parents and families as well.”

The hospital won two awards at the International Interior Design Association’s 2013 Best of the Best Gala (Georgia Chapter), one for the Healthcare Design category and one for best overall out of all 11 categories. Parenting.com writer Shawn Bean noted, “Set amidst a wooded expanse of central Florida, with theme park roller coasters peppering the horizon, Nemours Children’s Hospital is arguably the new high water mark for pediatric care in the United States.”

Designer turned educator Kiran Bir Sethi wanted to blur the boundaries between school and life to help young students become aware, enabled, and empowered to effect change in the world. In aiming to spread her message to millions of children across India , Sethi tapped IDEO and the d.school at Stanford to help create a design contest for youth that would show them that they could make a difference in their community.

Together with the d.school, IDEO designed a competition for middle school students called the Design for Change Contest. Adapting the human-centered design approach into a simple process that 10- to 13-year-old kids could follow on their own, the contest included rules, tools, and platforms that would be accessible to children and teachers throughout India regardless of their previous exposure to design.

The team shaped the rules so that students could learn core design-thinking skills such as empathy, brainstorming, collaboration, and reflection through the process of participating in the contest. And together, the group developed a toolkit to walk students through the simple four-step process.

The biggest challenges to the contest were overcoming the lack of infrastructure, language barriers, and a discrepancy in school resources. There was no national database of schools for easy outreach, so Riverside built relationships with NGOs across India to distribute the contest toolkit to more than 30,000 schools.

The contest receives about 2,000 entries from groups of youth in India each year. They have been addressing challenges such as illiteracy, pollution, traffic safety, care for the elderly, alcoholism, and the environment.

As of 2015, the Design for Change Contest has scaled far beyond India, and is being run in 30-plus countries, with millions of children participating. Each contest entry shows that kids really can make a big difference in the world.

In short order, a community of designers, entrepreneurs, and social sector innovators embraced it, buying and downloading over 150,000 copies.

In April 2015, IDEO.org launched an exciting new evolution of the HCD Toolkit the Field Guide to Human-Centered Design. The Field Guide is the latest in IDEO.org’s suite of teaching tools and a step forward in sharing the practice and promise of human-centered design with the social sector.

A full-color, 192-page book, the Field Guide comes with 57 design methods, the key mindsets that underpin how and why IDEO.org believes design can change lives, a full slate of worksheets, and case studies from projects that show human-centered design in action.

The Field Guide was funded by more than 1300 backers in a Kickstarter campaign that reaching nearly three times its initial goal. IDEO.org received an amazing outpouring of support and strengthened its deeply held belief that human-centered design can push the social sector forward.

IDEO.org is a nonprofit design organization that launched out of IDEO in 2011 with a mission to improve the lives of poor and vulnerable communities through design.

Visit designkit.org to download a free PDF, or get your own hard copy.

In 2009, IDEO designed and launched the HCD Toolkit, a first-of-its-kind book that laid out how and why human-centered design can impact the social sector.

After a bit of brainstorming, we hit on the perfect idea: a Noam-enabled modern twist on Pong, the classic, endlessly absorbing old video game.

The Pong-a-tron is considerably more complex than its predecessor. It links together four iPads, two Raspberry Pis, 12 Arduinos, 24 stepper motors, a Mac Mini, two Node.js applications, a Processing sketch, an Objective-C app, and over 2000 RGB LEDs. Noam coordinates the entire menagerie by hosting a conversation between all the different elements.

The Pong game itself was written in Node and broadcasts paddle and ball positions, which are then rendered on various portions of the overall display. The paddles are translated into physical "pixel" strips along the edges of the Pong-a-tron, while the ball moves seamlessly from Arduino-controlled RGB LEDs to iPads and Raspberry Pis.

The Pong-a-tron was initially showcased at Solid Conference 2014 and is now a permanent feature in the lobby of IDEO Chicago. Stop by and see it in person at a studio event, or pay Noam a virtual visit.

The Pong-a-tron would not be possible without the incredible talent, skill, collaboration and brainpower of many IDEOers including: Joe Banks, John Grimley, Travis Lee, Zeke Markshausen, David Sjunnesson, Ben Syverson, Jon Wettersten, Garrett Winther, and more. Video by Ben Syverson.

Noam is a software-messaging platform created by IDEO to help hardware and software tools communicate with one another. To introduce Noam to the world, we wanted to build a physical manifestation of the platform, something that was—like Noam—fun and exciting but also remarkably simple to use.

Our bell’s impressive literacy is the result of an experiment in creating cheap, simple, and easy-to-use networks of wireless sensors.

Miha Feus, the interaction designer at the helm of the project, points out that Internet-connected things are set to reshape our lives in ways we can’t even imagine. But while the technology isn’t particularly complicated, setting up and connecting the necessary sensors and receivers is difficult and expensive with the solutions currently available, and the battery life in these systems is terrible. Because of this, Miha says, experimentation by would-be makers is being stymied.

Miha’s solution is a system called Beachsand that aims to make wireless sensor networks, in his words, “as numerous, cheap, disposable, and user-friendly as grains of sand on a beach.” Beachsand is made up of a postage-stamp-sized smart transmitter called a SenseGrain and an Arduino-based receiver he’s dubbed the SandCastle.

You can plug any analogue sensor, button, or switch into a SenseGrain, measuring light, temperature, motion… anything you like. The SenseGrain then gathers data from those sensors and sends it to the SandCastle, and from there, you can use the information as you choose.

Miha explains that Beachsand isn’t really a product in and of itself, but rather a tool to help people cheaply and easily prototype new products, services, and data experiments. He and fellow interaction designer Siri Johansson have already prototyped one use case: the studio’s kitchen bell.

I caught up with Miha and Siri to find out more.

‍

What exactly is a SenseGrain, and how does it work?

Miha: A SenseGrain is an ATtiny85 microcontroller, which is basically a very stripped-down version of an Arduino, plus a transmitter circuit and a coin cell battery.

You plug in any analogue sensor or switch and set how often you want it to send data. The device then goes to sleep and waits until it receives whatever type of input you’re measuring (in this case, until someone rings the bell). The SenseGrain sends data from the sensor to a receiver, which, at the moment, is an Arduino, where you can access, use, and manipulate the data.

What’s so good about it?

Miha: It doesn’t require any soldering or programming, so it's easy to set up and requires no maintenance at all. I programmed the microcontroller so that it’s very energy-efficient—on standby, it can last up to 30 years on a single coin cell battery (theoretically, at least). And it’s cheap! Each SenseGrain costs $2-3 to make.

Because they’re so inexpensive, you could put them anywhere—in a trash can, for example, to monitor when it’s being opened. Or if you don’t want to check your mailbox, you could put a SenseGrain in there and Beachsand could just let you know when you have post.

Currently, anyone with an RF receiver on the same frequency is able to receive data the sensor is sending, and I would like to keep it that way. Keeping sensor data open gives more people the opportunity to build something with that data.

Can you explain your experiment with the bell?

Miha: It's our Kitchen Bell 2.0. It brings an ordinary object into the age of the Internet of Things, where every physical object has a digital layer.

Beachsand makes our bell more than a static object, limited by its location and the reach of its sound, and gives it the ability to transcend space and time to be “heard” anywhere in the world.

How did you build it?

Miha: First we had to pick the right sensor to detect when the bell is being rung. The simplest one in this case was a tilt switch. We plugged the switch into the RF transmitter and taped everything on the clapper of the bell.

The second part was about receiving the message from the sensor and sending out an email. For that, we used an Arduino and an RF receiver connected to a laptop, which talks to a program called Processing. In Processing, we used some existing code for sending out emails, which we modified for our needs.

What did you learn building the Kitchen Bell?

Siri: It makes you think about what the right tone of voice and personality is for a specific object. We wrote a few drafts of the bell’s email to the studio. It should be light and funny, but also demanding—it’s a bell, after all.

What inspired you from outside IDEO?

Siri: There's an interesting ongoing discussion on the narratives told by smart objects. Hello Lamp Post is a really nice example of giving a voice and personality to inanimate objects, and a lot of effort was spent to define the right tone of voice.

This way of working with sensors and actuators has interesting potential applications in both directions: physical to digital or vice versa. A couple of examples that work in the digital-to-physical direction are the UID cookie box, which rewards tweets with cookies, and Tableau, which quietly prints stuff it “sees” in its Twitter feed.

‍

What are you planning next?

Miha: Our colleague Alistair Norris is working on another application for the front door, to measure traffic in and out of the studio. We plugged a roller switch into a SenseGrain, which triggers every time the door opens, and added an Ethernet shield to the Arduino.

Beachsand is really still a work in progress. The next step is getting PCBs (printed circuit boards) done, so that I won't have to build every sensor transmitter by hand, which can take anywhere from one to four hours. With a PCB it will take just two to three minutes. PCBs are also less prone to malfunction.

Hopefully I’ll make a version with everything on board, including a littleBits connector. Then I’d like to build actuators, or “ActGrains,” to work with the SenseGrains and the SandCastle.

We’ll let you know more about Beachsand as we prototype more applications for it in the studio—or you might just get an update directly from our trash can, our front door, or the kitchen bell itself! You can find the code here in the meantime.

‍

The bell that rings in the kitchen at IDEO London sounds rather more sophisticated than the analogue clang you might expect to hear when meals and snacks are ready. Our bell prefers to send articulate email messages, like this recent missive: “I summon you all to the kitchen table for a Beer-n-Nuts with [Arduino co-founder] Massimo Banzi. Come join us. Cheers, your Kitchen Bell.”

Scott Murray is an assistant professor of design at the University of San Francisco, code artist, D3 expert, and contributor to the Processing language.

Scott is endlessly excited about using code as a tool for visual explorations of all kinds, from fine art to interactive data visualizations, but his students aren’t always quite so jazzed about the idea of programming. “They’re used to Photoshop and Illustrator, chopping up pictures and vectors,” he says. “Coding moves them into a totally different working environment.”

It’s Murray’s job to pry open students’ minds to not only the languages of code but also to a new way of thinking—a developer’s approach to solving problems and building things. To this end, he’s helping to continue the development of Processing language, which is tailored specifically to the task of teaching designers and artists to code. “There are pedagogical tools embedded in the language itself,” he says, like the use of familiar terms such as “stroke” and “fill” as well as processes that help students think like developers when approaching the craft of design. “For me, design is all about systems—not creating an image, but a system that, when applied, results in an effective solution,” Murray says. “Processing, as a teaching tool, forces students to think beyond the output or image they want to create and describe the system they’re making and what it needs to do.”

Processing gives designers new tools and expands their design thinking. It’s free, open source, and available to all at processing.org.

Keyfleas (2013) by Miles Hiroo Peyton

To get a sense of what beginners can do with the language, visit openprocessing.org and browse through the sketches.

If you’re itching to get your hands dirty, go straight to this collection of short, prototypical online programs that explore the basics of programming with Processing.

Check out the complete version of Scott Murray's New Year greeting card pictured in the header to this post here.

Every Thursday in Palo Alto, IDEO’s Digital Shop hosts an informal lunchtime presentation by someone who is using code to create something surprising, useful, or generally awesome. Colleagues from all around IDEO gather for a meal and leave with a week's worth of ideas to chew on. We’ve asked some recent speakers to highlight a quick insight or tool they’d like to share.

I help organizations cut through complexity by shaping how they show up, through brand strategy, identity, and storytelling.

Working at the intersection of brand and business, I bring an editorial eye and a bias toward making—turning ideas into tangible experiences that people can understand, trust, and believe in.

My work spans government, healthcare, financial services, media, and consumer goods, from launching Gen Z-focused ventures to building innovation labs and reimagining legacy brands. I relish moments of ambiguity and enjoy translating across teams, perspectives, and priorities to move ideas forward.

I started my career in editorial and digital design, shaping cross-platform experiences and identity systems in publishing and agency environments. That foundation still shapes how I work today: I’m detail-oriented, collaborative, and overreliant on the Oxford comma. I hold a BFA in Visual Communication from the School of the Art Institute of Chicago.

For 25 years, I've asked the same question: Who does this design exclude—and what are we going to do about it?

My work spans human-centered strategy, inclusive design, and qualitative research, with clients ranging from Microsoft, Google, and Verizon to the National Science Foundation, and San Francisco Unified School District.

Before IDEO, I taught elementary school in East Palo Alto and spent a decade doing design work with social service organizations—where I learned firsthand what it costs people when systems are built without them in mind.

I am currently writing User Error, a nonfiction book about digital access and the design decisions behind it. I live in Oakland, California.

‍

My expertise spans brand, communication, and product design across tech, education, the arts, and social impact.

I believe great work demands both high-level vision and obsessive attention to detail, and only happens through collaboration.

I bring an inclusive, hands-on approach and a deep understanding of business, which enables me to consistently deliver excellence while always asking why.

Before joining IDEO, I worked at the brand firms Pentagram and VSA Partners. I began my career as a designer, leading teams at the School of the Art Institute of Chicago and the Milwaukee Art Museum. I hold an MFA in graphic design from Maryland Institute College of Art and a BFA in communication design from the Milwaukee Institute of Art & Design, and have taught at some of the best design schools in the US.

I am responsible for IDEO’s long-term success in China and working with clients to use design as a tool to enable growth. Specifically, I have helped Chinese companies design holistic brand solutions through the development of their products, communication, services, and innovation teams, and I have helped multinationals expand their presence and influence in China.

I advise global leaders on developing China-led innovation and capabilities.

In over 15 years in IDEO Shanghai, I have worked on projects that use design to elevate the quality of the experience of healthcare products and services, streamline processes that increase productivity, create spaces and programs that promote and enable inclusive communities, and build next generation mobility solutions that are planet-positive.

Before joining IDEO, I worked at Philips Electronics and the Electrolux Group in Italy, the Netherlands, and Singapore on a number of breakthrough commercial products. I am a member of the Young President Organization in Shanghai.

Ed White has a rule he's tested on his own writing: hold yourself as the writer, and let AI be your editor. Ed is a Senior Design Director at IDEO's London studio, where he co-leads the firm's AI portfolio across Europe. Before IDEO, he spent 12 years as a writer and editor at the Financial Times, Wired, and Contagious. So when he talks about when to use AI for storytelling and when not to, it comes from two decades of crafting his storytelling skills.

‍

In this episode, Mina Seetharaman talks with Ed about two specific tools he uses to keep AI in an editor's seat: a "roasting agent" prompted to critique his drafts without any sugarcoating, and a simulated audience he rehearses pitches on before the real thing. They also get into what Ed is hearing from design leaders at Anthropic, Lovable, Shopify, and Google Creative Lab about how creative work is changing, and why he thinks the friction of writing something yourself is worth protecting rather than automating away.

Most AI products today are built for work—a space with clear problems and established systems. One founder noticed a gap: personal life is messier, harder to systematize, and mostly left behind by the AI boom. So she built Cue, a personal AI that lives inside iMessage and group chats, to go where the other tools haven't.

‍

In this episode, Becca Carroll, IDEO's Chief Strategy Officer, talks with Sida Li, co-founder and CEO of Shared Context Lab, about staying anchored to a human need while the technology around her keeps changing shape, why she treats her business model with the same rigor she'd bring to a product, and what it feels like to build a company at this particular, disorienting moment in AI.

‍

The conversation also gets into how Sida makes design decisions: the language Cue uses to describe itself, the tradeoffs behind building inside iMessage instead of a new app, and a real story about a business idea that didn’t pan out.

‍

This is the second in a two-part series profiling founders from IDEO's Startups-in-Residence program. The first conversation is with Johannes Seemann, founder of Sooner, on designing GenAI for the emotional side of money.

Most personal financial tools are built to run the numbers and optimize towards a budget. While that works for some, most people experience money as a lived relationship that does not neatly fit into a spreadsheet. Johannes Seemann and Becca Carroll discuss why money is emotional before it is mathematical, and what a human-centered approach to building a generative AI financial product looks like in practice.

Mina Seetharaman talks with Scott Shigeoka, author of Seek and Head of Curiosity Cultivation at the Eames Institute, about what distinguishes genuinely curious leadership from performative curiosity, how power dynamics shape curiosity, and why practicing curiosity can restore energy rather than drain it.