Have you ever had that gnawing feeling, just as you’re sitting down to your computer at work, that you’ve left the central heating on at home? You’re not alone. Rising concern about wasted energy and the financial cost of unregulated thermostats, as well as the convenience of a connected and cozy home, all point to the rise of the smart thermostat. Berg Insights projects it’ll grow 64.7 percent over the next five years.

Founded in Munich in 2011, tado° is Europe’s biggest maker of smart thermostats and air-conditioning controls. Looking to grow, tado° approached IDEO, a longtime collaborator, with a late-stage prototype for a new, wall-mounted gadget to connect any air-conditioning unit to the web so it could be controlled remotely through a smartphone app.

Dubbed tado° Cooling, the device recognizes when people leave their house and heats or cools the house upon their return. The brand tasked IDEO with a three-fold goal: gauge interest in the device, raise brand awareness, and work out product/market fit.

After stakeholder interviews, research, and prototyping, IDEO supported tado°’s team in refreshing the industrial design of the hardware and creating a distinctive yet unified user-interface language for the brand’s existing and future products.

To work out what potential customers thought of tado° Cooling, tado° turned to a novel research medium: Kickstarter. Its ultimate goal? Knowing whether people would part with their money for one. The IDEO team provided an overarching crowdfunding strategy, including funding goals, giving tiers, and marketing, and shot the brand’s Kickstarter campaign video.

As a result, the campaign burst through its $150,000 funding goal to $200,000, and scored coverage in a raft of tech media outlets including TechCrunch, GigaOm, TheNextWeb, Engadget, and PC Magazine. After hitting its “stretch goal,” tado° is adding non-A/C device controls, a Windows Phone app, and IFTTT and Jawbone Up integration.

In addition to media coverage, and showing the public’s appetite for the device, the Kickstarter community’s conversation unearthed further user insights that fed into product development, according to tado° head of design, Jens Pohl.

Buoyed by that success, tado° enlisted IDEO to translate user insights and a big-picture overview of the connected home sector into new services to enhance the device’s UX, and introduced new business models to strengthen its European brand strategy. Early visual concepts, learnings, and evidence from this exploration supported the brand’s investor pitch, securing a further round of $15 million venture capital.

Dr. Reddy’s, a 36-year-old global pharmaceutical company headquartered in India, was growing at a rapid pace. Over the years, the company’s main focus had been on producing affordable generic medication. But with more than 24,000 employees and seven distinct business units operating in 100 countries, there was an urgent need to identify a core, unifying purpose—one that would articulate a set of shared values and align leaders on key business decisions and goals.

G.V. Prasad, the company’s Co-Chairman and Managing Director, knew that the vision had to be simple and elegant–an emotional drive that every employee across the company could relate to and act upon.

Prasad partnered with IDEO to distill the focus that would align the company. Over the course of several months, Dr. Reddy’s team worked with IDEO to learn about the needs of everyone, from shop floor workers to scientists, external partners and investors. Together, they defined and distilled the essence of the company, paring it down to four simple words that center on the patient: Good health can’t wait.

The simplicity of these words belie their power. According to Prasad, the newly articulated purpose has resonated across the company, changing the whole culture of the organization. The idea of infusing a sense of urgency and nimbleness to their systems as a means of serving their customers has had a direct application in almost every corner of the business. Employees connect the message to their own experience, and each of the different business units are now moving towards a common goal.

A Shift Inside

“Good health can’t wait” has become a powerful recruitment tool and employee rallying cry. It makes clear that the company is in the business of serving patients, not just creating products, no matter how innovative or affordable. This has given a new sense of meaning to all personnel, from frontline sales representatives to senior leaders to scientists. Many key decision-makers, including new CEO Erez Israeli, share that the purpose statement inspired them to join the company.

Articulating Dr. Reddy’s purpose has empowered these employees to take risks, experiment, and work together. For example, the marketing department has refocused its efforts on finding solutions that improve patients’ consistent use of their medications. And motivated by the idea that patients can no longer wait for a cure, employees from different disciplines are coming together to find inventive ways of bringing new products to market in record time.

“The website medznat.ru required immense collaboration between various teams—medical, information technology, marketing, and analytics,” says Mvsma Raja, Head of Strategy and Marketing for Emerging Markets. “This served as a platform to bring the latest happenings in the area of pain management to doctors in Russia, who we learned are looking for the latest medical updates on the go.” Building on this cross-functional collaboration and momentum, Dr. Reddy’s established an internal design studio dedicated to using consumer insights and rapid prototyping to drive innovation.

New Offerings

“Our brand belief has inspired how we’ve thought about our future growth,” says CEO Erez Israeli. The new purpose unlocked a series of initiatives, including the aforementioned website for Russian physicians and innovative pill packaging that helps patients better understand their instructions.

Purple Pack is a new type of pill package that ensures that vital information like the expiration date is not torn off and thrown away. Born out of Dr. Reddy’s in-house design studio, Purple Pack allows the pharmacist or patient to mark their daily dosage and reminders on the packaging itself, as paper prescriptions are often misplaced.

A Business Boost

“Good health can’t wait” has not only attracted and unified talent and inspired new offerings, it’s boosted both sales and profit. For example, Dr. Reddy’s generic oral diabetes medication, Metsmall, has become the fourth largest brand in India based on the number of pills sold. The medication is distinct from competitors’ versions in that the pill is smaller and easier to swallow—a clear embodiment of product development oriented around the patient. With its signature Purple Pack convenience packaging, the medication has been one of the fast-growing Indian pharmaceutical brands over the last two years.

Looking ahead, both Prasad and Israeli hope to continue building a purpose-led culture that influences the business from the inside out, inspiring employees to be empathetic and responsive and realizing its mission to deliver good health to all.

In 2006, the MacArthur Foundation made what became a big bet about the future of education, shifting its attention away from the traditional school-based model of reform toward a more youth-centered approach.

By 2014, the bet was starting to pay off, but for it to really succeed, it needed an innovative path to scale and an entrepreneurial approach to sustainability. That’s when MacArthur came to IDEO for help in designing a new organization.

Together, IDEO and MacArthur set out to transform the foundation’s efforts into a self-sustaining enterprise that could balance the social responsibilities of a nonprofit with the lasting viability of a business—an opportunity that was as much about designing a new infrastructure as it was about creating a new culture.

Using a novel prototyping process, IDEO created three illustrated scenarios to tell different versions of LRNG’s possible future, each with an alternative portraiture of its purpose, vision, operating structure, product portfolio, and business model. Through a playful, modular storytelling structure, the stakeholders considered the potential trade-offs of the different approaches and how to prioritize their organizational goals with clear definitions of success.

These different future-forward scenarios helped funders and partners grasp a radical organizational vision, as well as a clear operational model that was go-to-market-ready.

In October 2015, the MacArthur Foundation launched Collective Shift, the organization behind LRNG, with $25 million in seed funding and 30 partners, including Arizona State University, Gap Foundation, the Boys & Girls Clubs, Electronic Arts, and musical artist John Legend.

Based on the scenarios created by IDEO, LRNG is dedicated to creating a “learning as a lifestyle” movement that will transform the learning landscape and close the equity and opportunity gap for young people.

Hundreds of millions of people, from excitable teens driving their first hatchback, to new parents going in for a minivan, have driven Fords off lots around the world since the first Ford Model A was produced in 1903. And cars have changed how we shop, travel, and work; they’ve reshaped our homes, towns, and the world’s infrastructure.

Today, Ford, along with the entire industry, is at an inflection point. As millions around the world move into gridlocked, polluted cities, the allure of owning a shiny new car has dulled. In some places, young people are driving less, and getting their licenses later or not at all. Lightening their load, city dwellers are relying on ride-sharing services and other alternatives to individual ownership.

Technology underpins that shift from ownership to usership. Smartphones, sensors, and open data have enabled new ways of getting from point A to B: from car-sharing services like Zipcar to taxi services like Uber or clever transport apps like Citymapper that help people skip effortlessly between the bus, a shared bike scheme, and renting a car.

While the owner of the very first commercially available Model A—Chicagoan dentist, Ernest Pfennig—couldn’t see more than a century ago how cars would change the world, Ford is squinting into its future by prototyping it now. Building on a longstanding relationship with IDEO, the carmaker approached us, along with a number of other partners, to undertake two of 25 experiments exploring a car company’s place in the changing world of mobility.

The first, Data-Driven Insurance, investigates a new pay-as-you-go insurance offer based on people’s driving behavior, as measured by a small adapter plugged into the car. The second, Infocycle, plots a snapshot of how bikes traverse the city and interact with cars and public transport by using Ford’s open source API, Open XC, to track cyclists around San Francisco.

Tackling the tangled ecosystems of bike sharing, private cars, and open city data proved an international effort. The two projects brought together a multidisciplinary team of researchers, hardware and software developers, data scientists, and interaction, industrial, and business designers from IDEO’s San Francisco, Palo Alto, Chicago, and London studios.

Have we cracked the future of mobility? Probably not. And that’s okay, says Fields. Smart mobility is simply part of Ford’s journey of evolution. Along with global competitions, collaborations with universities, and opening up their hardware and software platform Open XC, these experiments help Ford meet the needs of a fast-changing mobile world. “As we drive innovation in every part of our business,” Fields said, “we are determined to learn, to take risks, to challenge custom and question tradition, and to change our business going forward.”

More information on Ford’s Smart Mobility projects can be found here.

For this method of animation, make sure to use only lines in your Illustrator file. The idea is to animate the lines across their own path, so the way you design them will play a big part on how elaborate your animation will be.

Watch this video for a quick step-by-step guide to animating lines in After Effects:

1. When your Illustrator file is ready, import it to After Effects. You can simply drag your Illustrator file to the Project area or go to File > Import > File.
2. Drag the imported file to the Timeline. It will automatically create a Composition.
3. Now you must turn your Illustrator file into Outlines that After Effects can control. On the timeline, right click on the layer and select "Create Shapes from Vector Layer.
4. The next step is to animate your outlines. For that, you will need to add a Trim Paths feature to your new layer.
5. On Trim Paths, use keyframes for Start/End to change when and where you want your paths to animate. If your file has multiple lines, you can choose to animate them simultaneously or individually.

This technique is a simple and effective way to create powerful motion graphics for storytelling, user interface behaviors, or even a simple animated gif. Hope you enjoyed it!

Adobe After Effects is one of my favorite tools for prototyping user interfaces, creating video scenarios to communicate a context of use, or simply crafting stories through animation. It's a tool that allows you to explore and visualize ideas, and there's no right or wrong way to use it. Here are a few tips for using After Effects to animate vector lines imported from Adobe Illustrator.

So, when the opportunity comes up, I like to turn off the computer and focus on creating artifacts. While an object is just a thing that serves its purpose until it’s tossed out, an artifact sparks an invisible conversation, a connection between the human who made it and the human experiencing it. Even something that people don’t think twice about, like an event name tag, deserves to be well designed.

That belief drove me to create a collection of one-of-a-kind name tags for a CoLab event. I wanted to make something with my hands that would bring a level of craft to our content. The tags served as the icebreaker for more than a few conversations, and reminded people at the tech-focused event that there's a human element to everything. Many attendees we reached out to a month later said that they still had the tag on their desks.

The process was simple, but arduous: I laser cut blanks, etched the names, spray painted each tag using unique colors and angles, and finished it off with acrylic screen printing ink to make the names readable.

Here's how I did it, step by step:

1. Creating the blanks

I designed the negative of the template so that I could later use it as a jig. I used 18 x 24 inch sheets of 3mm acrylic, so that with the name tags at 2.5 inches x 3.5 inches, I could fit about 32 comfortably in each batch (as opposed to 38 if I used all available space and threw away the negative).

Acrylic sheets tend to melt and then cool quickly in the laser cutter, leading to possible sticking, so I usually add about .2mm to my thickness settings to compensate (i.e. I was using 3mm acrylic, but put 3.2mm in the settings). There are two benefits: One, you guarantee that you actually cut through the sheet. Two, it also gives you a little bit of wiggle room so you don’t end up with hard to pick out joints.

Pro tip: The key to making the most of your acrylic is to leave space for future cuts on the same piece. Instead of designing my reusable jig with all the name tags in the center, I threw them to one side so that I could use the other end again. After I cut the jig, I could get 38 tags out of each subsequent batch because I could simply throw away the negative. Another bonus: When there’s excess acrylic on one end, you can always tell which side goes in which direction.

2. Etching the blanks

Once the blanks were cut, I needed to take the protective plastic off of one side, so that I had a clean surface to etch onto. I peeled the tags, slipped my template jig back into the cutter, and dropped the blanks into place.

The etch file is the same as the template jig, just with a red cut box around the perimeter of the file denoting the edge of the acrylic.

Once I had an etch file ready to go, all I had to do was push the file to the top left of the cutting area and check the focus points of the laser on the first tags on the first and second rows. Since the etch file is in the same grid form as the old cut file, everything is already spaced for me. The etch settings held ink best at around 74 to 76 percent power at 100 percent speed.

One final thing to note: We don’t want to cut anything (we’re just etching), so after setting my etch power, I set the cutting lines to 0 percent power and 100 percent speed, so we just blow right past them.

3. Taping the etched tags*

Once the blanks were etched, I peeled the plastic off of the back of the tags, then covered the etched side of each in painters tape to keep them clean.

4. Spraying the tags

After everything was taped, I slapped some aluminum foil in the vent hood and got to work spraying each tag. The process allowed me to bring out some of the old airbrush tricks my dad showed me as a kid, like holding a tongue depressor at a 60 degree angle in front of the nozzle to create thicker splatter. I used two to three colors for each tag, at varying angles.

I used Montana brand spray paints, and I definitely recommend using the BLACK formula. Over the course of the project, it dried on the acrylic within four and-a-half minutes, which is pretty insane. The GOLD formula was comparable, but my run of the mill Krylon paints took much longer, so it’s worth the extra bucks to buy Montana.

Pro tip: If you’re spraying a bunch of parts in a hood, aluminum foil is actually a great material for coverage as it tends to not stick to your parts like paper.

5. Sealing the tags and revealing the beauty

After the sprayed tags had dried, I hit the painted side with a couple quick coats of the Montana clear matte varnish so that they wouldn’t stick to each other. When everything had dried, I peeled off the painter’s tape—my favorite part of the project.

6. Applying the ink inlay

Next came the most time-consuming part: the ink inlay. I used speedball acrylic screen printing ink for its fast drying time, and how easily it wipes off acrylic. I liberally brushed and swabbed the ink into the etch using a Q-tip, then quickly wiped the excess off with a paper towel. Once dry, they were ready to go.

That's it!

*Imperfect process: I know what you’re thinking—why didn’t you just remove one side of the plastic before etching, spray that side, then remove it from the other side, then etch that? I did! After a few batches, I added the taping step because I noticed the spray paint was eating away the plastic coating that kept the paint off the front of the tags.

I work with CoLab, IDEO’s tech-focused R&D group. I’m also someone who’s committed most of my life to craft. Luckily, my day job allows me to bring the two together. But the minute you start making a living from your craft, problems start to surface. You get burnt out. You compromise your vision to deliver things on time. At that point, you're no longer transforming objects—you’re just pushing matter around.

I snapped this photo in the Amazon jungle town of Iquitos, Peru. A jar full of individually cut blister packs sat in the corner of a general store set up in front of a family’s home. By making individual doses available—not even a daily dose, but a single, one-time dose—more families were able to afford treatment for their ailments. In a community where money is very scarce, this family was filling a very real, pressing need that wasn't being addressed by local stores.

Human-centered design requires us to observe human behavior with beginner's eyes, so that we can spot the innate ways people interact with the world around them. We call these intuitive and unconscious reactions Thoughtless Acts, and IDEO designers collect photos of them to inspire their work.

6:20 AM: Snooze

6:30 AM: Sweep

Sweep. Make the coffee, water the succulents, check out a few new product curation apps and services the team has been talking about. While riding the bus across the Bay, I read about immigration patterns and how they affect consumers in North America. Staying inspired is part of our job, so I try to start each day with a healthy dose.

9:00 AM: Birthday shenanigans

Today is my teammate Julian’s birthday, so we surprised him with donuts and orange juice—his morning elixir of choice!

9:30 AM: Sketching and 3D modeling

My team’s current project is to reimagine the shopping experience for a large retailer. To prepare for a review with the team, I do some sketching and 3D modeling of in-store display concepts. We are a diverse and interdisciplinary bunch, so it helps to bring everyone’s ideas together through visualization.

10:30 AM: Design review with the team

We do team check-ins throughout the day, talking through our ideas to make sure we’re meeting user needs and pushing the integration of digital behaviors and physical environments. Today, we’re critiquing a bunch of sketches of critical shopping moments that we’ll prototype later. We’re considering how digital projection can add ambient information and subtle interaction to a physical display layout.

11:30 AM: Creating a physical study model

In preparation for our prototyping session in the IDEO Shop, we use a rough physical model to map out the experience of the future retail environment. A small-scale model lets us discuss all the ways shoppers might interact with a brick and mortar store—from browsing to comparison shopping, saving for later or checking out and having things shipped home. It’s helpful to keep our work quick and dirty, so that we have a model that lets the entire team walk through design points together.

12:00 PM: Julian’s birthday lunch

Continuing the festivities, we pop out of the office to get a bite of Scandinavian-inspired eats.

1:30 PM: Field testing and 1:1 prototyping

Time to refine the rough mock-up made in the office and rebuild it in a live retail environment. We wear jumpsuits to suggest how we want the client’s brand to evolve (and because jumpsuits are cool).

The prototype begins outside the store with a simulated mobile shopping experience that ushers shoppers directly to our redesigned displays. The point of the prototype is to test a store layout that could feel like an extension of a mobile shopping experience. Think curated themes, minimal options, and intuitive product comparison interactions. Turns out, some things they hate, some things they love, and a few things don’t make sense to them at all! All of that is great feedback for moving forward, by the rock-and-roll rules of prototyping. Achieving a realistic level of physical interaction while keeping the design at a prototypical level is key to getting honest feedback. We draw our insights from watching how users interact with the space, as well as their answers to directed prompts.

7:30 PM: Teach

My nightcap is heading to California College of the Arts, where I teach a class about physical space and digital interaction titled “Objects & Space.” We work with sensors, hack projectors, control motors, glue, and foamcore, and build our way through code, all in the spirit of figuring out what the environments designers of tomorrow might do.

‍

When people ask me what I do for a living, I say, “I use space to explore design solutions.” It might sound like I work for NASA, but what we environments designers actually do is consider how physical space influences human behavior. Much of my time is spent sketching, making models, building walls out of foamcore, miming, turning off the lights, rendering, and doing my best to break feng shui. Here's a breakdown of a typical day:

I help organizations cut through complexity by shaping how they show up, through brand strategy, identity, and storytelling.

Working at the intersection of brand and business, I bring an editorial eye and a bias toward making—turning ideas into tangible experiences that people can understand, trust, and believe in.

My work spans government, healthcare, financial services, media, and consumer goods, from launching Gen Z-focused ventures to building innovation labs and reimagining legacy brands. I relish moments of ambiguity and enjoy translating across teams, perspectives, and priorities to move ideas forward.

I started my career in editorial and digital design, shaping cross-platform experiences and identity systems in publishing and agency environments. That foundation still shapes how I work today: I’m detail-oriented, collaborative, and overreliant on the Oxford comma. I hold a BFA in Visual Communication from the School of the Art Institute of Chicago.

For 25 years, I've asked the same question: Who does this design exclude—and what are we going to do about it?

My work spans human-centered strategy, inclusive design, and qualitative research, with clients ranging from Microsoft, Google, and Verizon to the National Science Foundation, and San Francisco Unified School District.

Before IDEO, I taught elementary school in East Palo Alto and spent a decade doing design work with social service organizations—where I learned firsthand what it costs people when systems are built without them in mind.

I am currently writing User Error, a nonfiction book about digital access and the design decisions behind it. I live in Oakland, California.

‍

My expertise spans brand, communication, and product design across tech, education, the arts, and social impact.

I believe great work demands both high-level vision and obsessive attention to detail, and only happens through collaboration.

I bring an inclusive, hands-on approach and a deep understanding of business, which enables me to consistently deliver excellence while always asking why.

Before joining IDEO, I worked at the brand firms Pentagram and VSA Partners. I began my career as a designer, leading teams at the School of the Art Institute of Chicago and the Milwaukee Art Museum. I hold an MFA in graphic design from Maryland Institute College of Art and a BFA in communication design from the Milwaukee Institute of Art & Design, and have taught at some of the best design schools in the US.

I am responsible for IDEO’s long-term success in China and working with clients to use design as a tool to enable growth. Specifically, I have helped Chinese companies design holistic brand solutions through the development of their products, communication, services, and innovation teams, and I have helped multinationals expand their presence and influence in China.

I advise global leaders on developing China-led innovation and capabilities.

In over 15 years in IDEO Shanghai, I have worked on projects that use design to elevate the quality of the experience of healthcare products and services, streamline processes that increase productivity, create spaces and programs that promote and enable inclusive communities, and build next generation mobility solutions that are planet-positive.

Before joining IDEO, I worked at Philips Electronics and the Electrolux Group in Italy, the Netherlands, and Singapore on a number of breakthrough commercial products. I am a member of the Young President Organization in Shanghai.

Most AI products today are built for work—a space with clear problems and established systems. One founder noticed a gap: personal life is messier, harder to systematize, and mostly left behind by the AI boom. So she built Cue, a personal AI that lives inside iMessage and group chats, to go where the other tools haven't.

‍

In this episode, Becca Carroll, IDEO's Chief Strategy Officer, talks with Sida Li, co-founder and CEO of Shared Context Lab, about staying anchored to a human need while the technology around her keeps changing shape, why she treats her business model with the same rigor she'd bring to a product, and what it feels like to build a company at this particular, disorienting moment in AI.

‍

The conversation also gets into how Sida makes design decisions: the language Cue uses to describe itself, the tradeoffs behind building inside iMessage instead of a new app, and a real story about a business idea that didn’t pan out.

‍

This is the second in a two-part series profiling founders from IDEO's Startups-in-Residence program. The first conversation is with Johannes Seemann, founder of Sooner, on designing GenAI for the emotional side of money.

Most personal financial tools are built to run the numbers and optimize towards a budget. While that works for some, most people experience money as a lived relationship that does not neatly fit into a spreadsheet. Johannes Seemann and Becca Carroll discuss why money is emotional before it is mathematical, and what a human-centered approach to building a generative AI financial product looks like in practice.

Mina Seetharaman talks with Scott Shigeoka, author of Seek and Head of Curiosity Cultivation at the Eames Institute, about what distinguishes genuinely curious leadership from performative curiosity, how power dynamics shape curiosity, and why practicing curiosity can restore energy rather than drain it.

Mina Seetharaman talks with David Epstein, author of Inside the Box and Range, about why total freedom often produces average work, how leaders can design useful limits on purpose, and what organizations such as General Magic and Pixar reveal about the relationship between boundaries and creativity.