As the curtain parted on moooi’s 2022 exhibit, the audience was treated to a multi-sensory performance unlike any other: four synchronized robot scent diffusers telling a story through dance. As the robots—called Piro—swayed and dipped to the beats of a custom-designed soundscape, it was easy to forget the performers were made by a team of industrial designers and engineers in San Francisco.

The work expressed a future vision for what it means to humanize technology. Rather than design technology to make our lives more efficient, what if instead we designed technology to make life more beautiful?

For twenty years, moooi has seduced the world with bold, imaginative design. The firm, named after the Dutch word for beautiful, made its name by designing furniture and home goods that appeal to an interest in pushing the edges of form as much as function. Moooi came to IDEO looking to create an exhibit for the largest furniture fair in the world that might provoke the audience to imagine a world where design’s primary function was to inspire joy.

“Defy Gravity”: one of several experiential “worlds” moooi created for the 2022 Salone del Mobile. Each room had its own scent, soundscape, color, and digital experience.

Our process started by going wide. We presented 20 potential conceptual designs to the team, one of which moooi founder Marcel Wanders lovingly referred to as the “farting pet,” a robot scent diffuser that could walk around the home.

A scented smoke ring lingers in the air after Piro’s final crescendo.

From there, a team of IDEO designers enlisted the support of Catie Cuan, a choreographer who specializes in human-robot interaction, and Dutch sound design firm KLOAQ, to refine the concept into a four-minute performance piece.

Piro learned to mimic balletic human gestures.

The final result was technically involved: four robots moved independently, controlled by custom electronics and software designed to mimic the movements and grace of ballerinas. But in the performance itself, the complex mechanics disappeared, allowing the audience to experience not just what technology can do, but how it can make us feel.

‍

What happens when a designer and a classically-trained choreographer collaborate? Attendees of Salone del Mobile.Milano, the largest furniture fair in the world, got to see for themselves.

To build a climate-resilient future, we need an all-hands-on-deck approach across industries and organizations, as well as the leadership and collaboration of frontline communities themselves. 

To that end, IDEO and CSAA Insurance Group worked together to unite nine partner organizations, including Aon and the Environmental Defense Fund, to launch an open call for solutions to help communities prevent, prepare for, and recover from climate-related disasters. The goal of the Challenge was to surface actionable and scalable ideas that experiment with new technologies, models, and partnerships, then provide innovators with the support and funding they need to get their ideas off the ground and into the hands of frontline communities.

IDEO set these entrepreneurs up for success throughout the submission process, holding one-on-one conversations with participants, sharing constructive feedback on potential solutions, and developing their ideas and skill sets. The team also hosted workshop and panel sessions to grow community bonds and provide expertise on critical topics, including assessing climate risk and storytelling for impact. Hundreds of ideas came in from around the world, ranging from harnessing the power of AI, to building resilient infrastructures, to democratizing access to climate data, and more.

Once all of the ideas were in, a cohort of judges with a wide diversity of work and lived experience screened for concepts that were relevant, impactful, novel, community-informed, and equitable. At the end of the Challenge, the team chose 13 winning concepts with high potential for impact and partnerships, including Reef Rocket, which seeks to fabricate natural biocement reefs that reduce coastal flooding and erosion, and BurnBot, which is working to prevent wildfires by conducting controlled burns at scale.  

For these winning entrepreneurs, the end of the Challenge is just the beginning. Now, they are equipped with critical early funding, as well as a cohort of climate entrepreneurs, along with mentorship from IDEO, CSAA, and the other organizations. It’s a big step forward as they introduce new forms of equitable and transparent data, promote the voices of BIPOC communities, and bring to market new technologies that will protect and support frontline communities through this ongoing crisis. 

Read the Challenge Impact Report to learn more.

In the US alone, climate-related disasters cause $120 billion in damages annually. That figure is five times greater than 50 years ago, and projections are $2 trillion by the end of the century.

Nearly 90% of counties in the US declared a natural disaster over the last decade.

418

submissions

13

winners

$1M

in prizes

Every year, the NSF provides around 30 teams with up to $750,000 and a year’s worth of coaching, training, and collaboration to develop solutions for research areas like sustainable ocean use or combating fake news. Over the course of nine months, the teams learn how to uncover insights about human needs and design durable solutions for end users. But many of the scientists and experts in the program felt stretched by the idea of putting the needs of end users in the mix with their scientific testing—something few of them have been trained to do in their previous work.

To make that process feel more achievable, the teams built out prototypes and received guidance on refining and pitching their ideas along the way. IDEO joined the project as an innovation partner, facilitating hands-on workshops and creating “Science TV” episodes that could help the program reach a broader audience, deepening its impact now and in the future.

To help grantees get vulnerable, and evolve their ways of working, IDEO sent grantees to improv training  so that they could learn to build off each other. The team also took them to magic shows and on ghost tours in downtown San Francisco to learn the value of compelling storytelling in their work. The fun was part of the plan—gelling as a team and building relationships meant participants could make mistakes in front of one another. Being wrong doesn’t come naturally to academics, but it’s a key part of the design process, and a crucial part of solving complex problems .

Each year, a select group of teams move onto the next phase of the “coop-etition,” receiving up to $5 million in additional funding. And all of the participants leave with valuable new skills they can use to break out of their own silos and create human-centered, ground-breaking solutions for the rest of their careers.

When the NSF launched the Convergence Accelerator and made the radical move of bringing together teams from different disciplines, these academics, scientists, and industry partners didn’t have a shared language to move their ideas forward, and needed a structured approach to coming up with new solutions.

164

trained research teams

$200M

in federal support granted to AI-driven innovation, quantum technology, food security, sustainable materials, opportunities for people with disabilities, and more

IDEO and The Earthshot Prize built a nine-month Fellowship program and a five-day, in-person retreat to give Finalists the best shot at reaching the Prize’s ultimate goal: to scale the solutions that will repair our planet this decade.

To build out the new Fellowship, IDEO took a deep dive with the previous year’s Finalists to uncover where they needed critical support. This research revealed that the Finalists needed more ways to leverage the Earthshot platform, connect with potential partners to help scale their ideas, and build community with each other. The IDEO team then used those insights to create a set of recommendations The Earthshot Prize team could implement to create a more supportive and structured experience. Ideas they took forward included assigning a designated “Leap Advisor” who could provide guidance and assistance for each Finalist, as well as an advisor from the Prize’s Global Alliance Network who could partner on specific growth initiatives, like scaling product design, or policy change. 

Next up: the design of the retreat itself. Together, IDEO and the Earthshot team had three goals for the cohort’s week together in Windsor: focus on new forms of leadership and movement building, spur action through storytelling, and foster community.

The team developed the curriculum with leaders from Google X and Speed & Scale, alongside startups like UPSIDE Foods. They designed moments to build community, like paired walks and a chocolate-making workshop where Finalists could get to know each other away from the noise of meetings. 

Photographers captured the event to create assets for Finalists to use when pitching their ideas, and Finalists honed their storytelling skills. But what most remember is the magical moments of coming together as a cohort of next generation climate leaders who will help each other make an impact on the problems facing our planet, long after The Earthshot Prize has concluded.

The problems facing our planet are enormous, spanning industries, borders, currencies, and regulatory environments. Meaningful solutions will require leaders who can work across those lines.

30

climate solutions accelerated in first two years

Name: Shruti Ramiah
Location: Munich
Role at IDEO: Design Research Lead
Joined IDEO: 2011
Website: www.shrutiramiah.com
Titillating Fact: I travel a lot for work, and one thing that helps me make every new place feel like home is the BBC World Service Radio (plus a healthy dose of BBC Radio 4). My grandfather used to tune into the World Service News every evening on Shortwave Radio. Now I have the digital radio on almost all the time, and I find the familiar voices very grounding. It’s also why so many of my conversations start with “So, I was listening to this show…”

1. Flash Forward

Flash Forward is a podcast about the future. Each episode starts with a little audio story playing out one potential future scenario—from the believable to the bizarre. I love the way Rose Eveleth brings intangible futures to life in these stories and then breaks them down to investigate the elements of the scenario.

2. New Philosopher

I discovered this magazine in Sydney. It’s one of many great independent magazines coming out of Australia. Each issue focuses on one theme that is relevant to contemporary life, and explores it from a variety of perspectives. I am amazed at how they make philosophical questions accessible and understandable. Don’t be put off by the name.

3. Jean Jullien

Jean Jullien is a wonderful graphic artist with a great light-hearted sense of humour in his work. Following him on Instagram ensures that there’s always a smile (or a smirk) waiting for me in my feed everyday. @jean_jullien

‍

In this series, we ask IDEO designers to share the stuff they're digging right now—tools, books, music, sites, people, places—so you, too, can drink from the fount of inspiration bubbling up here. This week's guest star: Shruti Ramiah.

OUR FIRST TIP COMES FORM NJOKI GITAHI, SENIOR COMMUNICATIONS DESIGNER AT IDEO, WHO RECENTLY LED INDESIGN NOVICES IN NEW YORK THROUGH AN EMAIL-BASED INTRO TO ADOBE'S POWERHOUSE PUBLISHING TOOL.

Sometimes you need to cut to the chase. If you're learning a tool outside your discipline, it's usually because a deadline is looming and your go-to experts can't help. There's no time to luxuriate in lessons. You need Quick + Dirty tips: bite-sized tool tutorials to beef up your skills, one morsel at a time.

Working with hardware enables designers to create more meaningful, situation-specific interactions that might feel cumbersome or be impossible with software alone. Last year, I had the opportunity to work on a project with IDEO.org (a nonprofit design organization that launched out of IDEO with the mission to improve the lives of people in low-income communities through design) that tested my software and physical design skills. The brief: Apply low-cost sensor technology to precision agriculture for smallholder farmers in developing countries.

Informed intuition

Before heading to the field, our small team started by researching precision agriculture practices and technologies for farms and households. We found inspiration in devices like Parrot Flower Power. Even so, we really had no idea what a good precision agriculture device could be, or what challenges farmers faced. But at IDEO, we believe that you learn best by doing. So we quickly ginned up three devices to facilitate conversation with farmers: the Magic Stick, the Ambient Sensor, and the Rice Shoot.

The Magic Stick

Physically, the Magic Stick was inspired by traditional farming tools like rakes and shovels. The tip of the stick was a temperature/humidity sensor that could be stuck into soil or crops that have been harvested and put in storage. Digitally, the Magic Stick created a data table that combined temperature and humidity with GPS location.

The Ambient Sensor

The goal of the Ambient Sensor was to help prevent the growth of a common toxin that spoils crops in storage in many parts of the world. The sensor tested the environment for the conditions that the toxin thrives in: high humidity and temperature. We designed the device to hang on a storage shed wall, and if high humidity and temperature conditions were detected, LED feedback would alert farmers and prompt them to ventilate the space.

The Rice Shoot

We designed the Rice Shoot to measure the water content of rice fields, making the process of rice paddy irrigation more resource efficient, and potentially increasing yields and reducing disease.

We brought our early prototypes to many farms in Kenya, Tanzania, and Myanmar—countries where IDEO.org had existing relationships. During our travels, we spent our days designing, wiring, and programming in the back of bouncing trucks, tidal river boats, and turbulence-prone airplanes. All the people we spoke with were smallholder farmers who need to farm in order to live. Together, we discussed the challenges of growing specific crops in specific regions, as well as any personal challenges they faced. In northern Myanmar's dry zone, we learned that there were no consistent optimal irrigation practices for betel nut, a cash crop that is a big part of the region's economy. Each farmer was watering at different times of day and for different lengths of time, with different yields.

Introducing the Betel Meter

Our time researching with these farmers showed that what they really needed was an upgraded Magic Stick—something with a brain. So we created the Betel Meter, a device that helps farmers create optimal irrigation for betel nut.

The Betel Meter is planted in key positions in a field and takes moisture readings once an hour. Once a day, a farmer presses the meter’s button. A green LED signifies that soil has a healthy moisture level and the farmer can irrigate normally. Red LEDs signify that the soil has been too dry, and farmers should keep irrigation taps open for an additional five or ten minutes. Blue LEDs signify when soil conditions are too wet.

To build the Betel Meter's brain, we used a TinyDuino from TinyCircuits, an Arduino compatible micro-controller with the power of an UNO. The TinyDuino, which is about the size of a quarter, has a brilliant architecture that allows any additional functionalities beyond basic processing to stack on top of each other. This allowed us to keep the core device small, even though it has a real-time clock, a data SD logger, and GPS boards.

Creating the baseline data for the meter turned out to be one of the biggest challenges of the project. Because optimal irrigation for betel nut in an agricultural zone as specific as northern Myanmar is unknown, we had to rely on white-paper research and some intuition. We first researched ideal moisture conditions for all plant life. Then we normalized evaporation rates for water in sandy soil, and cross referenced it against average temperatures for each month in the region.

The physical

The physical design was equally tricky, since the meter needed to withstand extreme weather for long periods of time to protect the sensitive electronics inside. Luckily, we had IDEO.org's Design Director and Co-Lead of the San Francisco studio, Adam Reineck, on the team. He quickly designed a 3D model in Solidworks and printed the form in nylon, which stood up against heavy rain—and even a sandstorm.

Our early prototypes used USB power banks; however, we knew that the Betel Meter had to be an “always-on” device with a reliable and constant power source. We opted for solar power, something the team had experience with. We began by hacking panels out of old solar camping lights and adding a few resistors and extra batteries to the circuit. That way, we could ensure that the device would store enough energy to power the micro-controller and components through the night.

Once we had our prototype, we returned to Myanmar to field test the Betel Meter, planting four of the devices in two fields. Not only did the Betel Meter provide irrigation feedback, it also recorded and created what we believe to be the first-ever dataset around optimal soil moisture for betel nut. People from all over the region came to see and take photos of the meter, and we were continuously asked to come back with the final working product.

From here, our ideal next step is to add machine learning that allows the device's software to evolve from its own data.

Working on the Betel Meter changed my personal approach to design and how I attack problems. Now, on every project, I try to find opportunities to create products that reach deeper into people’s physical lives than pixels on a screen.

Working with such an amazing team, in such a great place and on a product that challenged me the way the Betel Meter did, changed my life. I will be joining the team full time at IDEO.org in New York City this fall, where, hopefully, I will be part of the next chapter of the Betel Meter.

Read more on Fast Company

In my last article, I wrote about a hobby of mine: translating physical objects into digital experiences as a way to test my skills. Like most interaction designers these days, I am fascinated by understanding how digital can connect to our physical reality.

In a studio like ours, with a very distinctive creative culture, where people feel like they have ownership over their workspace, a massive, group art project would help us say goodbye together. Not only would it be one last hurrah for this studio, but it would also help reinforce the idea that our culture would be moving with us to the next space.

For years, our tradition at the Cambridge studio has been to reinvent our kitchen wall every six months or so. We’ve created everything from a hand-cut monster wall to a science fiction fine art series (think Yoda portraits in renaissance style). Knowing this mural would be the studio’s last, we wanted to create something that made people think and talk about design—reinforcing our values—and, of course, something big enough for everyone to be involved.

We also wanted to leverage our skillsets—Grace’s in drawing and painting, Greg’s in industrial design and fabrication—to pull together the project. At the time, Grace had been working on a series of dot drawings that caught Greg’s eye. They mimicked that phenomenon in nature when many tiny things form a greater whole. That seemed like a great metaphor for celebrating the multidisciplinary magic of the studio. So we decided to create a drawing as a base, and then scale it up into a wooden dowel installation.

To get started, Grace created the dot drawing (below on the left) that served as a guide for the dowels. She makes these dot drawings (one of which the mural is based on) over several hours of repetitive stippling. First, she measures the margins of the paper using a ruler as a guide, then forms all of the dots by keeping her hand as straight as possible.

We then scanned the drawing and used a Processing script that located the coordinates of each dot. Next, we used a custom Grasshopper script to place a circle at each centroid and extrude it up to the 3d surface that we created in Rhino. From there, we just exported the lengths of the dowels in order of installation to a CSV file for Chop-Chop, our cutting machine.

If we could design a method to cut the dowels in order, and then get the installers to place them in that same order, we’d be in business. To do it, we needed some way of organizing the dots into rows for the installers to follow—even though they’re not a perfect grid, since they were drawn by hand. By using Grasshopper script, we were able to find logical rows within the hand-drawn pattern.

Since the rows’ zig-zag route only appears in the software, we needed some type of marker for our installers to follow. By using a dot, double-dot, or no-dot marking scheme, we made it easy for our teammates to to identify and stay in their row, even if it zig-zagged.

The panel production took us seven days. We used a ShopBot Alpha to mill each hole, then made a second pass to mark the hole with the appropriate dot pattern.

Each of the 20,000 dowels is a different length, so we built a CNC bandsaw to help us cut them all. After sketching a few concepts, we settled on a JET bandsaw augmented with a custom digital stop.

We created the digital stop using parts we designed and 3D printed, as well as stock parts from Adafruit, Misumi, McMaster-Carr, SparkFun, and Arduino. Arduino reads the length of each dowel from the SD card, then turns a stepper motor and timing belt, moving the stop to the correct length. Once the dowel is cut, the miter sled hits a switch and tells the stop to move to the next position. Once we were in a rhythm, the process was pretty smooth.

One of the goals of this mural was to maintain the feeling of human touch that’s so obvious in the original drawing once we scaled it up to the mural. So we decided to design a straightforward process for our installers, and then chalk up any misplacements to the artistry of human error. As we chopped the dowels, we slotted them into trays marked with row number, tray number (some rows had up to 6 trays), and the dot scheme, so the installer knew where to start.

Four months later, we were ready for the big install. We invited the entire studio to come in on a Saturday morning, and we were blown away by the number of people who trickled in. Before we knew it, close to 40 people were helping out. Some heroes even stayed until 2 a.m. There were people hammering in dowels, cutting on Chop-Chop, filling trays, documenting with photo and video, and making beer runs. The assembly lines were staggeringly efficient and fun. It was a robot love fest.

We had hoped that there may be some errors in the process and we were happy to see them. You can find these beauty marks where the surface of the dowels gets uneven—that kind of inconsistency is impossible to predict or design, and it completely enhanced the beauty of the piece. Working together with the studio on a piece defined by the installers was a true bonding experience. It was an inspiring weekend for all of us, and we know that we’ll carry that with us in our move around the corner.

Music by Dan Deruntz. Footage by Chris Wright, Tom Kershaw, Dirk Ahlgrim, and Greg Wolos.

Materials: 20,928 birch dowels, 5/16” diameter; 7 MDF Panels, painted white; jet bandsaw; custom linear slide; Arduino MEGA; Big Easy Stepper Driver; Adafruit LED display; stepper motor; timing belt and pulleys; limit switches; custom 3D printed parts

Software: Rhino, Grasshopper, Processing, Arduino

Suppliers: Adafruit, Misumi, McMaster-Carr, SparkFun, Jet Tools

‍

As we prepare to move from our current Cambridge studio into a new space around the corner, we can’t help but think of it as a place where many of us began our IDEO journey—sneaking up to the roof for sunset cocktails and riding in the freight elevator to the pop-up gallery in the basement. We knew giving it a proper goodbye should mean involving everyone.

I help organizations cut through complexity by shaping how they show up, through brand strategy, identity, and storytelling.

Working at the intersection of brand and business, I bring an editorial eye and a bias toward making—turning ideas into tangible experiences that people can understand, trust, and believe in.

My work spans government, healthcare, financial services, media, and consumer goods, from launching Gen Z-focused ventures to building innovation labs and reimagining legacy brands. I relish moments of ambiguity and enjoy translating across teams, perspectives, and priorities to move ideas forward.

I started my career in editorial and digital design, shaping cross-platform experiences and identity systems in publishing and agency environments. That foundation still shapes how I work today: I’m detail-oriented, collaborative, and overreliant on the Oxford comma. I hold a BFA in Visual Communication from the School of the Art Institute of Chicago.

For 25 years, I've asked the same question: Who does this design exclude—and what are we going to do about it?

My work spans human-centered strategy, inclusive design, and qualitative research, with clients ranging from Microsoft, Google, and Verizon to the National Science Foundation, and San Francisco Unified School District.

Before IDEO, I taught elementary school in East Palo Alto and spent a decade doing design work with social service organizations—where I learned firsthand what it costs people when systems are built without them in mind.

I am currently writing User Error, a nonfiction book about digital access and the design decisions behind it. I live in Oakland, California.

‍

My expertise spans brand, communication, and product design across tech, education, the arts, and social impact.

I believe great work demands both high-level vision and obsessive attention to detail, and only happens through collaboration.

I bring an inclusive, hands-on approach and a deep understanding of business, which enables me to consistently deliver excellence while always asking why.

Before joining IDEO, I worked at the brand firms Pentagram and VSA Partners. I began my career as a designer, leading teams at the School of the Art Institute of Chicago and the Milwaukee Art Museum. I hold an MFA in graphic design from Maryland Institute College of Art and a BFA in communication design from the Milwaukee Institute of Art & Design, and have taught at some of the best design schools in the US.

I am responsible for IDEO’s long-term success in China and working with clients to use design as a tool to enable growth. Specifically, I have helped Chinese companies design holistic brand solutions through the development of their products, communication, services, and innovation teams, and I have helped multinationals expand their presence and influence in China.

I advise global leaders on developing China-led innovation and capabilities.

In over 15 years in IDEO Shanghai, I have worked on projects that use design to elevate the quality of the experience of healthcare products and services, streamline processes that increase productivity, create spaces and programs that promote and enable inclusive communities, and build next generation mobility solutions that are planet-positive.

Before joining IDEO, I worked at Philips Electronics and the Electrolux Group in Italy, the Netherlands, and Singapore on a number of breakthrough commercial products. I am a member of the Young President Organization in Shanghai.

Most AI products today are built for work—a space with clear problems and established systems. One founder noticed a gap: personal life is messier, harder to systematize, and mostly left behind by the AI boom. So she built Cue, a personal AI that lives inside iMessage and group chats, to go where the other tools haven't.

‍

In this episode, Becca Carroll, IDEO's Chief Strategy Officer, talks with Sida Li, co-founder and CEO of Shared Context Lab, about staying anchored to a human need while the technology around her keeps changing shape, why she treats her business model with the same rigor she'd bring to a product, and what it feels like to build a company at this particular, disorienting moment in AI.

‍

The conversation also gets into how Sida makes design decisions: the language Cue uses to describe itself, the tradeoffs behind building inside iMessage instead of a new app, and a real story about a business idea that didn’t pan out.

‍

This is the second in a two-part series profiling founders from IDEO's Startups-in-Residence program. The first conversation is with Johannes Seemann, founder of Sooner, on designing GenAI for the emotional side of money.

Most personal financial tools are built to run the numbers and optimize towards a budget. While that works for some, most people experience money as a lived relationship that does not neatly fit into a spreadsheet. Johannes Seemann and Becca Carroll discuss why money is emotional before it is mathematical, and what a human-centered approach to building a generative AI financial product looks like in practice.

Mina Seetharaman talks with Scott Shigeoka, author of Seek and Head of Curiosity Cultivation at the Eames Institute, about what distinguishes genuinely curious leadership from performative curiosity, how power dynamics shape curiosity, and why practicing curiosity can restore energy rather than drain it.

Mina Seetharaman talks with David Epstein, author of Inside the Box and Range, about why total freedom often produces average work, how leaders can design useful limits on purpose, and what organizations such as General Magic and Pixar reveal about the relationship between boundaries and creativity.